SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Wing attachment block SNX-W11-03 attach pin hole

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.
Post a reply

Wing attachment block SNX-W11-03 attach pin hole

Postby Sonex1517 » Thu Feb 16, 2012 4:25 pm

agreed Andy - I borrowed a drill setup with an attachment to make the drill bit sit at 90 degrees - but it requires a relatively large flat area and is not always applicable without additional cheaters or a jig....see attached.

I am still curious - after completing both main spars, then disassembling the ribs off of them, that is the point where I join the two spars and drill up? Everything I read makes me believe that is correct...
Attachments
ImageUploadedByTapatalk1329423847.009607.jpg
ImageUploadedByTapatalk1329423847.009607.jpg (57.12 KiB) Viewed 2082 times
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX
Top

Re: Wing attachment block SNX-W11-03 attach pin hole

Postby MichaelFarley56 » Thu Feb 16, 2012 6:56 pm

Once the spars are assembled I can't think of any reason why you can't join them and drill. I did that before I started fitting ribs.
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio
Top

Previous
Post a reply

Return to Sonex

Who is online

Users browsing this forum: No registered users and 17 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.