SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

HYDRAULIC BRAKE LINE ROUTING

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.
Post a reply

HYDRAULIC BRAKE LINE ROUTING

Postby Jim B » Wed Oct 28, 2015 6:22 am

I have had the aero conversion hydraulic brake kit since it was first offered by the factory but have not installed yet. I am now getting ready to install them in my tri gear sonex. I am looking for advice on routing of the hydraulic line in the trigear configuration from the master cylinder to the gear leg. I have the brake lever set up on the left side of the cockpit per plans. Is it routed through the wing spar tunnel under the wing spar or some other way?
Thanks in advance
Jim Ballenger
snx760/jab2200
first flight SEPT 2009
Jim Ballenger
snx760/jabiru2200
first flight Sept 2009
Ocala,Fl
Jim B
 
Posts: 30
Joined: Wed Jun 11, 2014 5:01 pm
Location: Ocala, fl
Top

Re: HYDRAULIC BRAKE LINE ROUTING

Postby jjbardell » Wed Oct 28, 2015 7:14 am

Attached are three links to pictures of how I installed on my plane. I routed them through the main spar and then looped into the legs. I created two small .032 brackets to hold the tubes into a nice bend on the forward side of the spar. The right line will have very little to no extra length, so keep the run direct as possible. Hope this helps.

http://i1204.photobucket.com/albums/bb4 ... C9BB3F.jpg

http://i1204.photobucket.com/albums/bb4 ... 86369D.jpg

http://i1204.photobucket.com/albums/bb4 ... 3F7038.jpg
Building: [11323] Zenith 750 CruzerDuty27.5 / O-320 [Instagram Build Log: Zenith750CruzerSTOL]
N67LJ - Vans RV-9A #90504 (SOLD)
N83LJ - Sonex #0864 (SOLD)
https://rvpilotlife.wordpress.com/blog/home/
User avatar
jjbardell
 
Posts: 315
Joined: Wed Feb 25, 2015 5:12 pm
Top

Re: HYDRAULIC BRAKE LINE ROUTING

Postby Bryan Cotton » Wed Oct 28, 2015 8:19 am

Also, in the sport trainer controls thread, John posted some great pics of nosegear brake line routing.
viewtopic.php?f=43&t=1984&start=10
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: HYDRAULIC BRAKE LINE ROUTING

Postby Jim B » Wed Oct 28, 2015 3:49 pm

JJ/Bryan
Thanks for the info and pixs. They are very helpful.
Jim
Jim Ballenger
snx760/jabiru2200
first flight Sept 2009
Ocala,Fl
Jim B
 
Posts: 30
Joined: Wed Jun 11, 2014 5:01 pm
Location: Ocala, fl
Top

Post a reply

Return to Sonex

Who is online

Users browsing this forum: No registered users and 70 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.