I'm in - Just ordered a Turbo Onex

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

Re: I'm in - Just ordered a Onex

Postby SonexN76ET » Thu Oct 15, 2015 6:50 pm

In the case of the Aerovee, you are the manufacturer of the engine so you set your own limits. Aeroconversions as the engine kit maker only provides suggested guidance on what power settings to use. You are the one who will set the limitation on maximum continuous power for the engine you build.

Jake
Sonex Tri Gear, Rotax 912 ULS, Sensenich 3 Blade Ground Adjustable Propeller
MGL Velocity EMS, Garmin GTR 200 Comm, GTX 335 ADS B Out Transponder
ILevil AW AHRS & ADS-B In, UAvionix AV20S
200+ hours previously with Aerovee engine
Sarasota, Florida
User avatar
SonexN76ET
 
Posts: 494
Joined: Tue Aug 27, 2013 2:39 pm
Location: Atlanta

Re: I'm in - Just ordered a Onex

Postby 13brv3 » Thu Oct 15, 2015 7:07 pm

SonexN76ET wrote:In the case of the Aerovee, you are the manufacturer of the engine so you set your own limits. Aeroconversions as the engine kit maker only provides suggested guidance on what power settings to use. You are the one who will set the limitation on maximum continuous power for the engine you build.

Jake


True of course, but it's comforting to know that the aircraft manufacturer also verifies it. I just watched most of the really long turbo webinar, and in the Q&A at about 40min, Jeremy states with 100% certainty that the turbo is sport pilot legal for all of their aircraft.

So far, this isn't helping me resist :D

Rusty
Rusty
Onex- Rotax 912 (160 hours and counting)
Fixed wing, gyroplane, A&P
13brv3
 
Posts: 466
Joined: Fri Sep 25, 2015 11:59 am
Location: Tellico Plains, TN

Re: I'm in - Just ordered a Onex

Postby Bryan Cotton » Thu Oct 15, 2015 9:38 pm

A 13B in a Onex would be super cool.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5492
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: I'm in - Just ordered a Onex

Postby 13brv3 » Thu Oct 15, 2015 11:42 pm

Bryan Cotton wrote:A 13B in a Onex would be super cool.


Knock that off :lol:

Rusty
Rusty
Onex- Rotax 912 (160 hours and counting)
Fixed wing, gyroplane, A&P
13brv3
 
Posts: 466
Joined: Fri Sep 25, 2015 11:59 am
Location: Tellico Plains, TN

Re: I'm in - Just ordered a Turbo Onex

Postby 13brv3 » Thu Oct 22, 2015 1:38 pm

As you can see from the change in subject, I decided to go for the turbo. There are plenty of rational reasons to stick with the non-turbo engine, but ultimately I'm sure I would have regretted it. I may regret the turbo too, but in a different way :D

Now I wait for the kit and engine to arrive...

Cheers,
Rusty
Rusty
Onex- Rotax 912 (160 hours and counting)
Fixed wing, gyroplane, A&P
13brv3
 
Posts: 466
Joined: Fri Sep 25, 2015 11:59 am
Location: Tellico Plains, TN

Previous

Return to Onex

Who is online

Users browsing this forum: No registered users and 25 guests