Getting Ready for flight

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

Getting Ready for flight

Postby Klimek » Sun Aug 09, 2015 12:49 am

Tomorrow my little bird will fledge. After 3 years, 2 months and 9 days, "OLD #90" is going to be trailered to Siloam Springs, Ar. municipal (KSAG) where the wings will
be reinstalled and a final check performed prior to the first flight. I'm going to wait till the weather cools a bit before flight tests. It has been in the upper 90's here
in northwest Arkansas, however, next week promises mid 80's and I will take advantage of lower 70's in the early am.
I have decided to fly off the first 40 hours prior to painting in the odd chance something needs to come back apart, paint scheme unknown at this time.
There have been some trials and tribulations while building and have been helped tremendously by Sonex techs, by friends "Dr" David Moore, Rick Wantz, known to
this group as "nwawingman" and ONEX builder, Rudy Polacek in Gassville, Ar. Thanks to everyone on this forum for your help. The proof will be in the pudding.
Frank
ONEX 090
N1970K
Klimek
 
Posts: 94
Joined: Fri May 02, 2014 6:26 am
Location: Springdale, Ar....Northwest corner of the state

Re: Getting Ready for flight

Postby nwyooper » Sun Aug 09, 2015 1:03 am

Good luck and blue skies
Loren
Onex 33
nwyooper
 
Posts: 39
Joined: Sun Dec 15, 2013 10:28 pm

Re: Getting Ready for flight

Postby wlarson861 » Sun Aug 09, 2015 1:19 am

Just understand it takes about a week to knock the grin off your face! Been there done that and still grinning.
Bill Larson
N861SX
Sonex, polished, tail wheel, Generation 4 Jabiru 3300
wlarson861
 
Posts: 499
Joined: Wed Dec 05, 2012 11:41 pm

Re: Getting Ready for flight

Postby Stogie6 » Sun Aug 09, 2015 9:39 am

Frank,
I look forward to your first flight report. I am probably 4 to 6 months out from first flight on Onex 0153. I wll be keeping mine at the West Memphis airport (KAWM). Looks like a gathering of Onex's at Gastons will be in the future!
Have a great flight.
David F. Jones
Memphis (Mud Island), TN
Aerovee powered Onex
N153TD
Based at KAWM and in the midst of Phase 1
User avatar
Stogie6
 
Posts: 132
Joined: Sun Jan 06, 2013 11:36 am

Re: Getting Ready for flight

Postby Bryan Cotton » Sun Aug 09, 2015 9:59 am

Good luck Frank!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Getting Ready for flight

Postby nwawingman » Sun Aug 09, 2015 1:17 pm

Frank,

Can't wait to celebrate that first flight with you! What a fantastic job you did building her and I know you will be very pleased with how she flys.

I wish you many years of great adventures. You've earned it!

Rick
Rick Wantz - Arkansas
Sonex 367 T/W AeroVee/Aeroinjector - Prince Elliptical Prop <361hrs
1st Flight 7/13 KOSHX3 Young EaglesX14
http://www.mykitlog.com/wingman
https://www.youtube.com/channel/UC2TNLK ... A63FvnPkNA
nwawingman
 
Posts: 139
Joined: Sat May 17, 2014 4:54 pm
Location: Arkansas

Re: Getting Ready for flight

Postby onex28 » Sun Aug 09, 2015 2:18 pm

Enjoy it Frank.

David
ONEX 28
onex28
 
Posts: 220
Joined: Thu Jun 09, 2011 9:43 pm
Location: MN

Re: Getting Ready for flight

Postby Onex107 » Fri Aug 21, 2015 11:38 am

The first flight is a thrill, and very satisfying.
OneX 107
N2107X
Onex107
 
Posts: 506
Joined: Mon Mar 24, 2014 6:44 pm
Location: Peoria, IL


Return to Onex

Who is online

Users browsing this forum: No registered users and 27 guests