SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Kevin's Waiex 0211

Use this area to create a thread with photos from your build.
Post a reply

Re: Kevin's Waiex 0211

Postby kevinh » Sun Jun 21, 2015 12:05 am

Almost ready to assemble right flap. Just need to deburr, dimple and rivet (drilled holes to final size after this photo)...

Image

Also - Becky helped make the aileron counterweight assemblies...

Image
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA
Top

Re: Kevin's Waiex 0211

Postby kevinh » Thu Jun 25, 2015 8:03 pm

Left flap done. Now on to ailerons. I hope to have the first one done by the end of the weekend...

Image
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA
Top

Re: Kevin's Waiex 0211

Postby kevinh » Wed Jul 01, 2015 12:24 am

Right aileron finished except for the tip. On to left tomorrow night...

(A small spacer not listed in plans is needed when riveting the counterweight to the hinge line, correct?)

Fun!

Image
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA
Top

Re: Kevin's Waiex 0211

Postby kevinh » Fri Jul 24, 2015 6:14 pm

Hi ya'll,

I've been puttering on pretty consistently but bad about posting updates. Ailerons now finished, most of the rib prep work (gussets, aileron belcranks etc...) is done, now starting on the spar subassemblies. Fun!
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA
Top

Previous
Post a reply

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 26 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.