Fibreglass Cowling

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.

Fibreglass Cowling

Postby Corby202 » Wed Jun 24, 2015 2:21 am

I need to do some fibreglass work on my cowling. Did you guy's use polyester or epoxy?? I know the cowling is polyester but would prefer to use epoxy, just not sure how strong the joints will be.
Thanks
Phil
Phil Bird
Sonex 759 JAB 2.2 Tailwheel
Mittagong NSW Australia
http://www.mykitlog.com/corby202/
https://www.flickr.com/photos/78427482@ ... otostream/
Corby202
 
Posts: 223
Joined: Mon Dec 30, 2013 2:08 am

Re: Fibreglass Cowling

Postby Gripdana » Wed Jun 24, 2015 7:11 am

I used West Systems which I believe is an epoxy. It did the job very well
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm

Re: Fibreglass Cowling

Postby kmacht » Wed Jun 24, 2015 7:33 am

I second the west systems epoxy. I did the whole horizontal split mid with it and the stuff worked great. If you have a boat supply place near you they usually stock it.

Keith
#554
kmacht
 
Posts: 772
Joined: Tue Jun 21, 2011 11:30 am

Re: Fibreglass Cowling

Postby sonex892 » Wed Jun 24, 2015 5:39 pm

Phil
Either resin will work on polyester. I narrowed the universal cowl quite a bit to better fit the Jabiru and used polyester for that. Its still good after 5 years.
Image
sonex892
 
Posts: 169
Joined: Fri Jun 03, 2011 4:49 am
Location: Port Macquarie Australia

Re: Fibreglass Cowling

Postby Corby202 » Wed Jun 24, 2015 7:19 pm

Thanks guy's. Sounds like I should be ok using Epoxy.
Phil Bird
Sonex 759 JAB 2.2 Tailwheel
Mittagong NSW Australia
http://www.mykitlog.com/corby202/
https://www.flickr.com/photos/78427482@ ... otostream/
Corby202
 
Posts: 223
Joined: Mon Dec 30, 2013 2:08 am


Return to Sonex

Who is online

Users browsing this forum: No registered users and 69 guests