Full Swivel Tailwheel

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Re: Full Swivel Tailwheel

Postby mike.smith » Sun Feb 22, 2015 3:37 pm

Fastcapy wrote:I am not trying to start an argument with you. You just posted that and made it sound in another post that you were not sure how you would handle a crosswind with a tailwheel that can break free to swivel.


No argument taken :D I was just curious how the that particular tailwheel physically worked (the engineering).
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm

Re: Full Swivel Tailwheel

Postby Jim1342 » Sun Feb 22, 2015 4:06 pm

How are you mounting the Matco tail wheel? The setup in the Matco online catalog shows a full swivel set-up attached to a std. flat tail spring.
Jim1342
 
Posts: 12
Joined: Sun Feb 24, 2013 2:52 am

Re: Full Swivel Tailwheel

Postby Fastcapy » Sun Feb 22, 2015 4:51 pm

-----
Last edited by Fastcapy on Tue Feb 24, 2015 1:38 pm, edited 1 time in total.
Mike Beck
Oshkosh, WI (KOSH)
Sonex #1145 N920MB
Std Gear, Modified Aerovee, Rotec TBI, Dual Stick, Acro Ailerons
MGL Panel
Airworthiness: 10/24/13, First Flight: 05/18/14
Fastcapy
 
Posts: 335
Joined: Sun Jan 12, 2014 11:45 am
Location: KOSH

Re: Full Swivel Tailwheel

Postby vfrazier » Mon Feb 23, 2015 11:47 am

Here's the link to the Sonex differential brake set up that Todd Reifers put on his Onex.
https://flyboyaccessories.wordpress.com ... ake-setup/
vfrazier
 
Posts: 3
Joined: Sat Feb 21, 2015 11:30 pm

Re: Full Swivel Tailwheel

Postby vfrazier » Wed Apr 01, 2015 3:01 pm

I have several of the forks completed now. Contact me at vincefrazier@gmail.com if you want more info.
vfrazier
 
Posts: 3
Joined: Sat Feb 21, 2015 11:30 pm

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 65 guests