Transponder recommendation

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges

Transponder recommendation

Postby grevaly » Wed Jan 28, 2015 9:23 pm

I am looking at the Trig mode s class 1 transponder. Trig has a certified ads-b out wass gps box as an add on that is
supposed to meet ads-b out requirements... the add on is about $3500. From What I understand...transponder has to be
mode s w/squitter and class one, class two is no good. ADS-B out requires 'certified' wass enabled GPS receiver..
big dough, plus overkill for most of our missions, and cant fit in our panels. Has anyone else looked at trig?
Mark Conner
Sonex Std Gear Aerovee #1242
Mostly Plans Built
grevaly
 
Posts: 35
Joined: Sat Nov 16, 2013 7:05 pm

Re: Transponder recommendation

Postby daleandee » Wed Jan 28, 2015 11:35 pm

*
Last edited by daleandee on Sat Jun 24, 2017 12:38 am, edited 1 time in total.
User avatar
daleandee
 
Posts: 877
Joined: Fri Feb 01, 2013 6:14 pm

Re: Transponder recommendation

Postby rizzz » Thu Jan 29, 2015 1:58 am

I went with the Trig TT21.
Here in Australia the Class 2 TT21 is sufficient or operations below 15000ft for aircraft with normal cruizing speeds below 170KT (referred to as ADS-B Class B0).
(See: http://www.comlaw.gov.au/Details/F2009L04631)

I don't have the GPS yet though.
In Australia we have to be fully compliant by Feb 2017, however, any new aircraft to the register after Feb 2014 have to be equipped with a compliant transponder. Also, any transponder replacement on existing aircraft have to done with be compliant transponders.
I will fly my aircraft later this year (hopefully) but since you don't need to be fully compliant, just have a compliant transponder, I am waiting with the purchase of the GPS till 2017.
Hopefully the prices will have dropped by then it is expected that they will drop now the U.S. deadline is also getting in sight.
This document exaplains the above in detail:
http://www.airservicesaustralia.com/wp- ... 8MAR12.pdf

Again, for Ozzie builders only, the U.S. seems to be going one step further requiring a Class 1 Transponder for all.
Michael
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
rizzz
 
Posts: 869
Joined: Tue Jun 21, 2011 2:07 am
Location: Wollongong, NSW, Australia

Re: Transponder recommendation

Postby daleandee » Thu Jan 29, 2015 2:40 am

*
Last edited by daleandee on Sat Jun 24, 2017 12:37 am, edited 1 time in total.
User avatar
daleandee
 
Posts: 877
Joined: Fri Feb 01, 2013 6:14 pm

Re: Transponder recommendation

Postby Gripdana » Thu Jan 29, 2015 3:27 am

Take a look at the UAT option for ADS-B. It does not require anything more then a mode c transponder. It is different then using a transponder and ADS-B in/out equipment. And is a less expensive option. The one I have been looking at is approved and has a built in GPS. It will be one unit to get compliant.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm

Re: Transponder recommendation

Postby Bruce593SX » Thu Jan 29, 2015 9:23 am

Keep reading before you spend a fortune, all you need is a regular old mode c transponder and a UAT box that has a certified waas GPS. Don't buy one yet, there are quite a number of companies with these boxes still in development
Bruce Johnson
Sonex 593 AeroVee Turbo
Plans building near San Antonio, TX
Bruce593SX
 
Posts: 99
Joined: Fri Aug 15, 2014 9:59 am

Re: Transponder recommendation

Postby DCASonex » Thu Jan 29, 2015 9:52 am

Starting to see a lot of push back on the requirements for this from AOPA, noting cost and poor return on investment plus appears that conventional mode C will also still be required. Would hold off on any transponder purchase as long as possible.

David A.
DCASonex
 
Posts: 935
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA

Re: Transponder recommendation

Postby Bryan Cotton » Thu Jan 29, 2015 10:12 am

Some years ago I bought an old KT76A and encoder for the hummelbird, which I plan to use on the Waiex. I may get my money's worth out of it yet.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5491
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Transponder recommendation

Postby fastj22 » Thu Jan 29, 2015 11:09 am

I have an old Garmin mode C I bought off Barnstormers for $500. If I were to buy a new one now, I'd probably get that Trig21 which is upgradeable to ADS-B out later.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: Transponder recommendation

Postby jerryhain » Thu Jan 29, 2015 12:13 pm

From AOPA news:
For some other types of aircraft, including experimental aircraft, no path to compliance currently exists.

“ADS-B compliance requires a supplemental type certificate or new type certificate for the aircraft where it will be installed,” the letter explained. “But since experimental aircraft, by definition, are one of a kind and do not have type certificates, no supplemental type certificate can be issued.”

May want to wait a bit before spending $5k
Jerry Hain, Tucson AZ
Waiex Electric?
CFI Glider/Airplane/Helicopter A&P
User avatar
jerryhain
 
Posts: 81
Joined: Thu Dec 04, 2014 1:12 pm
Location: Sahuarita, AZ

Next

Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 23 guests