Loctite 272

Discussion of the Aerovee kit engine.

Loctite 272

Postby Sonex1517 » Fri Dec 26, 2014 11:23 am

Hey all

So I need to use Loctite 272 on my flywheel gland nut, and both the manufacturer and several distributors say it is not available. They also said there is no equivalent.

I find this hard to believe. I know a couple of others have recently needed this stuff. Anyone have a source or an alternative?

I did get Loctite 270 but it has a lower rating


Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Loctite 272

Postby Gripdana » Fri Dec 26, 2014 11:29 am

I bought some at my local auto parts store. I do not plan on using it again for a long time and If I do I will buy new so it is fresh. I think it cost $14.00. I am happy to send it to you today via USPS priority mail. No cost to you. I just ask that this one makes the rounds to anyone who wants it. Just let me know. It will take a few days to get to you. The same goes for the starter loctite. That one cost a bundle. I can send you that one at the same time.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm

Loctite 272

Postby Sonex1517 » Fri Dec 26, 2014 11:31 am

Email sent. And I will pay it forward


Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Loctite 272

Postby Gripdana » Fri Dec 26, 2014 11:35 am

The brands that I have are made by Permatex. They are equivalent products to loctite brand. I will send you both. I had to order the one for the starter. These were both surprises for me. I went through the instructions and did not find them until I needed them.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm

Loctite 272

Postby Sonex1517 » Tue Dec 30, 2014 9:14 am

I want to say thank you to Dana, as he saved me by sending me some Loctite 272. around Chicagoland, at least, no one stocks it.

Thank you Dana!


Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Loctite 272

Postby Rynoth » Wed Dec 31, 2014 12:03 pm

Would this (Permatex 27200) not be an equivalent product? $9 on Amazon.

http://www.amazon.com/Permatex-27200-Hi ... atex+27200
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN

Re: Loctite 272

Postby Gripdana » Wed Dec 31, 2014 1:29 pm

That is what I sent to Robbie along with the Permatex 262. I do not plan on using it on anything else yet. They are only used on the gland nut and starter bolts. The 2 bottles were well over the 5 dollars it cost to ship USPS Priority mail. I figure it can make the rounds to anyone who needs it until it is empty.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm


Return to Aerovee

Who is online

Users browsing this forum: No registered users and 15 guests