Wing skins in pallet

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.

Wing skins in pallet

Postby Sonex1517 » Wed Oct 19, 2011 4:58 pm

Question for e crowd

We got our wing kit early, not working on it yet. Currently the pallet is in my parking space in the garage....I need to put my car there and am wondering if the wing skins in the pallet will be ok if the pallet is safely stored on edge instead of flat...?

Anyone have a clue? Don't want to bug tech support with this one...
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Wing skins in pallet

Postby Mike53 » Wed Oct 19, 2011 5:58 pm

Robbie,one thing that was made very clear to all of us that attended the last workshop was that a big part of the money we send to them for our kits includes unlimited tech support,so I honestly wouldn't worry about bothering them.
I would guess that it makes no difference as long as it was done gently,and someone may tell you they did it with no problem but maybe he got lucky .I believe it was President Reagan that said "Trust but verify".I am sure you can trust everyones judgement here ;) but you have paid for the right to verify.
Cheers.
Mike
Mike
I know but one freedom, and that is the freedom of the mind.
Antoine de Saint-Exupery
Onex 080 now flying,Hummel 85HP ,Tri gear,GRT Mini X EFIS,and EMS,iFly 740 GPS
User avatar
Mike53
 
Posts: 486
Joined: Mon Jun 20, 2011 10:00 pm
Location: Dutton,Ontario , Canada

Re: Wing skins in pallet

Postby N111YX » Wed Oct 19, 2011 7:38 pm

Robbie, after handling all of the parts of the aircraft hundreds of times, I cannot see how storing the skins on edge, in the pallet, would be a problem. There may be some shifting when placing it up the first time and that would be the only caution. Even out of the pallet would be OK with a bit of care.
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Wing skins in pallet

Postby Andy Walker » Wed Oct 19, 2011 8:21 pm

I store all my skins that way, out of the pallet between two sheets of plywood. I put the butcher paper from in the pallet between each skin. So far just the normal handling scuffs.
User avatar
Andy Walker
 
Posts: 375
Joined: Sat Jul 02, 2011 10:27 pm

Re: Wing skins in pallet

Postby Sonex1517 » Wed Oct 19, 2011 8:43 pm

Thanks Andy and Kip!
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Wing skins in pallet

Postby 142YX » Wed Oct 19, 2011 10:43 pm

No problem at all. I started my project in New Hampshire, and then moved to California after a few months. I re-built a similar palet to the one that they shipped in and had a moving company lug all of my stuff (including the whole kit) 3000 miles for me. I carefully explained to the crew that the large palet must remain flat for the entire voyage. Not 5 minutes later i saw the crew literally throwing it into the back of the truck. When it arrived, (in a different truck) it was vertical in the truck (the tall way). I was absolutely furious and made quite a scene about it (felt bad for the guy who delivered everything, as he was not the guy who packed it up on the east coast).

In any event, even after all that abuse there was absolutely no damage to the skins at the end of that long voyage. I learned a valuable lesson however, that i will never higher a professional moving company again in my life (i think those self-packing pods are the way to go).
Waiex # 142 - Taildragger, Jabiru 3300
First Flight - July 13th, 2015
450 hours and counting..
User avatar
142YX
 
Posts: 263
Joined: Thu Sep 01, 2011 10:18 pm


Return to Sonex

Who is online

Users browsing this forum: flyguy0609 and 25 guests