Aerovee Turbo Kit

Discussion of the Aerovee kit engine.

Re: Aerovee Turbo Kit

Postby MichaelFarley56 » Sat Dec 13, 2014 2:24 pm

I got the same email Brett! I'm very excited as well. I believe the first group of shipments are going out now as well as more next week.

Can't wait!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Aerovee Turbo Kit

Postby Sonex1517 » Sat Dec 13, 2014 8:15 pm

Yep - got my email also. Arrives Monday!

Perfect timing as I have two weeks off for the Christmas break.


Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Aerovee Turbo Kit

Postby Bryan Cotton » Sat Dec 13, 2014 10:14 pm

I'm gonna have turbo envy. Still, looking forward to the reports!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Aerovee Turbo Kit

Postby ScottM-Sonex1629 » Sun Dec 14, 2014 10:16 am

You and me both Bryan! I'm excited for the guys getting the turbo upgrades. Sadly my wife could not see the benefit of me spending another $4k right now on my project, so I went ahead and ordered the straight exhaust and a prince p-tip prop to complete my build (normally aspirated).
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Aerovee Turbo Kit

Postby Rynoth » Sun Dec 14, 2014 9:06 pm

When you guys get your deliveries can you comment on whether they were complete or had backorder parts? My full aerovee+turbo kit had several back ordered parts (including some turbo exhaust parts).
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN

Re: Aerovee Turbo Kit

Postby marsolgp » Sun Dec 14, 2014 9:32 pm

Rynoth

A quick glance at the photos you posted shows the exhaust system and it looked complete (tubing wise) . What appears to be missing are two intake tubes that run across the top from the center piece to the intake manifold on the head…… But will definitely let you know if any parts missing or backordered. (I do kinda doubt any parts will be backordered as the reason for the delay in shipping was because they were waiting for all parts to arrive).
G. Marsolais
Waiex w/Turbo Aerovee
Rotec TBI, Sensenich Climb Prop
MGL Xtreme EFIS & EMS
A/P, iFly720 w/ADS-B
marsolgp
 
Posts: 119
Joined: Thu Feb 14, 2013 8:29 pm
Location: Kansas

Aerovee Turbo Kit

Postby Sonex1517 » Mon Dec 15, 2014 10:33 pm

Just did the inventory on mine and it appears to be complete.

Part T05-37 hides against the side of the box. Easy to miss.

Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Aerovee Turbo Kit

Postby daleandee » Tue Dec 16, 2014 11:33 am

Sonex1517 wrote:Just did the inventory on mine and it appears to be complete.

Part T05-37 hides against the side of the box. Easy to miss.

Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved


Great news! Now the question becomes ... With all of these turbos being shipped (great news on all parts being in the box) which one will be the first customer Turbovee to fly?

Curious,

Dale
N319WF
User avatar
daleandee
 
Posts: 877
Joined: Fri Feb 01, 2013 6:14 pm

Re: Aerovee Turbo Kit

Postby ScottM-Sonex1629 » Tue Dec 16, 2014 1:42 pm

Dale,

I'm not trying to place any pressure on him, but my money is on Mike Farley. Why? His Waiex is already flying and I know that his engine is in the process of tear down right now in anticipation of the Turbo arrival.

We shall see, there may be others out there who are in the shadows and not posting here that are further along?
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Aerovee Turbo Kit

Postby MichaelFarley56 » Tue Dec 16, 2014 4:27 pm

I wish Scott! I've got a few parts still on backorder including new heads for my AeroVee. I'm not sure how long it will take to get all the remaining parts, but hopefully soon!

Until I get said parts, I'm still sort of at a standstill. I also know I'm not the only one who has a flying airplane so we will see! I may the one of the first few, but I'm not sure about being the actual first customer to fly.

We will see...
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

PreviousNext

Return to Aerovee

Who is online

Users browsing this forum: No registered users and 40 guests