Aerovee box size for shipping

Discussion of the Aerovee kit engine.

Aerovee box size for shipping

Postby Bryan Cotton » Wed Sep 03, 2014 11:07 am

If I was to pick up my aerovee at the local Con-Way service center, would it fit in my saturn or would I need to borrow my wife's truck?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Aerovee box size for shipping

Postby wlarson861 » Wed Sep 03, 2014 11:23 am

mine came in several boxes that will fit in about any car. Whole thing should fit on the passenger seat if need be (but that would be tight). The biggest box will be the case, a miscellaneous box and the jugs and a box for the heads. I think there were 5 or six separate boxes.
Bill Larson
N861SX
Sonex, polished, tail wheel, Generation 4 Jabiru 3300
wlarson861
 
Posts: 499
Joined: Wed Dec 05, 2012 11:41 pm

Re: Aerovee box size for shipping

Postby Bryan Cotton » Wed Sep 03, 2014 2:11 pm

Thanks Bill! Are the boxes shrink wrapped together like the airframe kit?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Aerovee box size for shipping

Postby MichaelFarley56 » Wed Sep 03, 2014 5:56 pm

When my engine was delievered, they were not shrink wrapped together. Each box had its own shipping label; they just all traveled together. Like Bill said, it's not one big box; there are several smaller ones, and I doubt any box weighs more than 30 or 40 lbs. The biggest is the box the case comes in. You shouldn't have any issues fitting everything into your trunk or other seats.
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Aerovee box size for shipping

Postby ScottM-Sonex1629 » Wed Sep 03, 2014 6:11 pm

I fit the three boxes mine came into the back seats of my Honda Accord if that helps give you a size idea. Here is what's inside each box.

Image
Image
Image
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Aerovee box size for shipping

Postby Bryan Cotton » Wed Sep 03, 2014 7:39 pm

Thanks guys! I will be picking up at Con-Way. Only 8 miles from work, right down the highway.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Aerovee box size for shipping

Postby Bryan Cotton » Fri Sep 26, 2014 2:25 pm

Mine came shrink wrapped together on a pallet:
Image

One box in the trunk, two plus the baffles on the back seat of my '99 saturn.
Image
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Aerovee box size for shipping

Postby Rynoth » Tue Dec 02, 2014 4:33 pm

I just took delivery of my Aerovee turbo and it was a total of 5 boxes, considerably larger than the pics above. It barely fit in the entirety of my VW hatchback.

Image

Image

Image

Image

Yes, I could not wait to peek inside a few of the boxes before driving it home.
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN

Re: Aerovee box size for shipping

Postby MichaelFarley56 » Tue Dec 02, 2014 6:05 pm

Congrats on the delivery Ryan!! Very exciting stuff!

If you get a chance, please snap a picture of the turbo and/or the exhaust system as I would like to see how large of pieces they are. I'm sure they take a lot of room!

Thank you!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Aerovee box size for shipping

Postby Sonex1243 » Thu Jan 28, 2016 5:25 pm

I'm starting to think about ordering a turbo engine soon, that being said, is there any problem with storing it for awhile in the original packaging?
Ken S
SONEX #1243 N424SX (reserved)
Tail complete, wings done
Fuselage on gear
Jab 3300 received!
Sonex1243
 
Posts: 312
Joined: Thu Jan 08, 2015 4:59 pm

Next

Return to Aerovee

Who is online

Users browsing this forum: No registered users and 37 guests