Build Photos (hundreds) for Sonex #1339

[NWade]

Hello All,

I'm building #1339 as an all-flush-riveted taildragger with the extended ailerons, center-stick, and a turbo AeroVee under the cowling. I began building from scratch in 2009, but after about 70 hours I realized my career constrained my time too much for a full scratch-build so I switched to a kit. I purchase the machined angle option, but have chosen to assemble my own spars. At the time of this post I'm complete with the empennage, part of the LH wing (including the spar), and the complete RH wing (minus the aileron).

I average about 1 photo for every ~30 minutes of work, and all are available on Picasa (or Google plus, if you must). Photos are in reverse order so the newest items are always on-top, with older work further down.

https://picasaweb.google.com/103964152364205921975/SonexBuild
https://plus.google.com/photos/103964152364205921975/albums/5530178779116848689

Here is the Build Log/spreadsheet:
https://docs.google.com/spreadsheets/d/1PtOWjPUOj6Q3vIXhz88KonC1LsWqYIU9adV-7Qi_vHU/edit?usp=sharing

Enjoy!

--Noel