SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Aerovee Turbo Kit

Discussion of the Aerovee kit engine.
Post a reply

Aerovee Turbo Kit

Postby SonexN369UR » Fri Nov 21, 2014 10:24 pm

Hello everyone.
I was just notified by Sonex that my Aerovee Turbo Kit is ready for shipment and I should receive it here in Florida the week of 2 December 2014. I plan to thoroughly document the upgrade and test flight in great detail. have all ready received the new prop I ordered as well. My Sonex is N369UR at Zepherhills Florida. Some of you may have seen her at the Florida Sonex Association Fly in there.
SonexN369UR
 
Posts: 25
Joined: Wed Jun 22, 2011 4:10 pm
Location: Tampa Bay Area, Fly out of Zephyrhills Florida.
Top

Aerovee Turbo Kit

Postby Sonex1517 » Fri Nov 21, 2014 10:48 pm

Good to hear! Time to check my email!!
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX
Top

Re: Aerovee Turbo Kit

Postby Brett » Sat Nov 22, 2014 12:18 am

Nice one !!!! Hoping mine should be following yours soon after.... however I still have to finish building my Sonex first. Will look forward to hearing all about it.. :)
Sonex 1645
VH-VWS
Tailwheel
Former Aerovee Turbo
Rotax 912
Brett
 
Posts: 269
Joined: Tue Apr 08, 2014 3:49 am
Location: Geraldton W.A Australia
Top

Re: Aerovee Turbo Kit

Postby MichaelFarley56 » Sat Nov 22, 2014 12:24 pm

I haven't heard anything official either but I'm hoping soon! Thanks for sharing.
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio
Top

Re: Aerovee Turbo Kit

Postby Bryan Cotton » Sat Nov 22, 2014 3:41 pm

I see Turbo Envy in my future. Still think it is good for me to control costs now, teach the kids to fly with 80HP, and let you guys beta test. I may want to upgrade by 2020.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5492
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Aerovee Turbo Kit

Postby Brett » Sat Nov 22, 2014 8:08 pm

A good sensible decision Bryan. I just couldn't help myself and had to order one. I just hope it doesn't turn out like the ground adjustable prop that I rushed into.
Sonex 1645
VH-VWS
Tailwheel
Former Aerovee Turbo
Rotax 912
Brett
 
Posts: 269
Joined: Tue Apr 08, 2014 3:49 am
Location: Geraldton W.A Australia
Top

Re: Aerovee Turbo Kit

Postby Gripdana » Sat Nov 22, 2014 8:29 pm

I too am waiting to see how the turbo works out and how the installation looks. I thing I will need to move some of the items on the firewall for the turbo. I would go turbo now but I just want to finish and fly around the country. Maybe I'll do it when I have to install for ADS-B.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm
Top

Re: Aerovee Turbo Kit

Postby Darick » Sun Nov 23, 2014 2:44 pm

Yes, I too am having turbo envy, but my wallet says no for now. However, it would be good to know what space in the engine compartment should be reserved for the future addition. Just thought about this...does the turbo require the higher compression ratio?
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA
Top

Re: Aerovee Turbo Kit

Postby marsolgp » Sun Nov 23, 2014 4:55 pm

Quick answer is NO to the higher compression..... I believe all in flight testing, by Jeremy , to date has been on an 8:1 engine. Test cell work is being done on a 7:1 engine. (May be flying now....)

When I replaced my Nikasil cylinders, in preparation for the turbo, I set mine to 7.5:1
G. Marsolais
Waiex w/Turbo Aerovee
Rotec TBI, Sensenich Climb Prop
MGL Xtreme EFIS & EMS
A/P, iFly720 w/ADS-B
marsolgp
 
Posts: 119
Joined: Thu Feb 14, 2013 8:29 pm
Location: Kansas
Top

Re: Aerovee Turbo Kit

Postby Brett » Sat Dec 13, 2014 9:39 am

Pretty excited, had a ups shipping tracking number emailed today,
Turbo on route.........
Sonex 1645
VH-VWS
Tailwheel
Former Aerovee Turbo
Rotax 912
Brett
 
Posts: 269
Joined: Tue Apr 08, 2014 3:49 am
Location: Geraldton W.A Australia
Top

Next
Post a reply

Return to Aerovee

Who is online

Users browsing this forum: petep and 41 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.