Scott from Dublin, OH

Scott from Dublin, OH

Postby ScottM-Sonex1629 » Sun Aug 11, 2013 10:14 pm

Good evening!

Mike F (Waiex owner here near Columbus) and I have been chatting off line for about a month now and he just informed me of this forum.

Let me introduce myself. My name is Scott M and I have a problem. I have been following Sonex ever since I obtained my Private Pilot license in 2000. I always wanted to build an experimental kit plane but my wife thought it was too risky. She joked that if I could build a car then we could discuss it and go from there! Over the last 10 years I have successfully completed two kit cars, one of which was an award winning Factory Five 1965 Cobra replica.

Image

Well I am getting back into aviation after a longer than expected hiatus and my wife and I recently made the trek to Oshkosh and visited Sonex's factory and placed the order for a Complete Airframe Kit. We were very impressed with the factory and quality of the kit and options to suit my needs.

I should be receiving my airframe kit before the end of the month!

Sonex Plans #1629
Tri-Gear
Dual Controls (with plan to do the lowered seat)
AeroVee 2.1 engine ( with Turbo?)

I will figure out the avionics when I am ready but like the concept of a glass panel with moving map GPS.

Looking forward to starting this long awaited project and gaining help and insight from those who have made this trek before me!

Scott Meyer
Dublin, Ohio
Last edited by ScottM-Sonex1629 on Tue Aug 13, 2013 8:58 pm, edited 3 times in total.
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott from Dublin, OH

Postby MichaelFarley56 » Sun Aug 11, 2013 10:29 pm

Glad you found the forum board here Scott! You'll find a lot of great people on this website, and in the Sonex community as well. I can't wait for you to get started on your kit! I do have to admit a little bit of jealousy since your kit will be the matched hole version, while lots of us didn't have that luxury! You'll be able to build your kit much faster than I did.

Keep us up to date on when you get your kit. Are you going to start with the tail first?

Mike
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Scott from Dublin, OH

Postby EricS » Mon Aug 12, 2013 8:27 am

Congrats on your kit purchase Scott! We probably bumped into each other at OSH.

Just as Mike said, feel free to reach out anytime. This is a great group and everyone is very helpful.
Eric Seber
Waiex #153
Jasper, Indiana
http://www.mykitlog.com/EricS/
EricS
 
Posts: 93
Joined: Fri Jun 15, 2012 12:49 pm
Location: Jasper, Indiana

Scott from Dublin, OH

Postby Sonex1517 » Mon Aug 12, 2013 9:15 pm

Hey Scott

Welcome aboard! If you've been talking to Mike you're in good company!


Robbie
Sonex 1517

Sent from my iPad using Tapatalk HD
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Scott from Dublin, OH

Postby ScottM-Sonex1629 » Thu Aug 22, 2013 11:14 pm

Sonex has shipped my kit and its in the Columbus area, delivery is set for tomorrow afternoon. Will take lots of photos to document the day!
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott from Dublin, OH

Postby MichaelFarley56 » Thu Aug 22, 2013 11:21 pm

Sounds like a great way to start the weekend Scott! I hope you and the family enjoy your special day!

Have a great time and take lots of pictures!!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Scott from Dublin, OH

Postby ScottM-Sonex1629 » Fri Aug 23, 2013 4:55 pm

Well future Sonex #1629 has arrived (or landed?) as a series of 11 boxes, tubes and flat pallet.

Didn't take as many pictures as I did when my car arrived (probably because I was doing all the heavy lifting).

As Mike said, having fun (and sweating) doing the inventory.

Anybody know where the plans and manuals are boxed up, or does that get shipped separately?
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott from Dublin, OH

Postby MichaelFarley56 » Fri Aug 23, 2013 5:53 pm

Hmmm...the plans should be in their own box, maybe around 4" x 4" x 24". Sonex rolls them up and ships them in a box. Do you not see them? I'm a little surprised they didn't send them to you early. Have you opened all the boxes?

If you haven't seen them, I'd try to call them quick.
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: Scott from Dublin, OH

Postby SonexN76ET » Sun Oct 26, 2014 5:10 pm

Scott, now that you are well into building your Sonex, how does the experience compare to building your Factory Five Cobra? I saw some pictures of your Cobra and it looks fantastic. I have been thinking about building a Cobra myself for quite some time as well. I have really enjoyed building my Sonex and am a little concerned about not having something to build after I get everything completely done on my Sonex. I am working on my upholstery and smoke system right now.

Your Sonex build looks great!
Sonex Tri Gear, Rotax 912 ULS, Sensenich 3 Blade Ground Adjustable Propeller
MGL Velocity EMS, Garmin GTR 200 Comm, GTX 335 ADS B Out Transponder
ILevil AW AHRS & ADS-B In, UAvionix AV20S
200+ hours previously with Aerovee engine
Sarasota, Florida
User avatar
SonexN76ET
 
Posts: 494
Joined: Tue Aug 27, 2013 2:39 pm
Location: Atlanta

Re: Scott from Dublin, OH

Postby Bryan Cotton » Sun Oct 26, 2014 5:34 pm

Holy thread resurrection Batman! When I was still a car guy I swore my next one would be a kit rather than a restoration. The cobra is cool. The treasurer from my old EAA chapter built one too, after he built his acro sport.

Other aspects of the builder's disease could probably warrant its own thread.

Edit: did you ever find your plans?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Next

Return to Introductions

Who is online

Users browsing this forum: No registered users and 7 guests