SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

WIX-F15

Discussion for Waiex builders on specific plans page experience. These posts are limited to technical suggestions such as assembly order, challenges, or techniques related to specific plans pages.
Post a reply

WIX-F15

Postby Bryan Cotton » Mon Oct 06, 2014 11:40 pm

If you have the machined angle component kit, don't make your -09 flap drive pivot block assembly from hand measurements. Transfer the 3/16" holes from the -07 flap drive mount to the phenolic. Or make them on a mill, or do them twice like I am. The second time around I have transferred the holes with a transfer punch to a scrap piece of 1/8" aluminum and I will use that as my template.

This would be equally true for a Sonex but I don't know the plans page. Maybe somebody wants to post this info on the Sonex plans area.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: WIX-F15

Postby ScottM-Sonex1629 » Tue Oct 07, 2014 12:11 am

Bryan I believe the plans page are the same for the Sonex
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)
Top

Re: WIX-F15

Postby Rynoth » Tue Oct 07, 2014 8:12 am

This is also true for the rudder pedal mount blocks. In fact I would suggest to hold off riveting both the flap and rudder mounting plates (to the side fuselage) until the rudders and flap drive tube are fitted.
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN
Top

Post a reply

Return to Waiex Plans

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.