PTT wires Solder vs crimp

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges

PTT wires Solder vs crimp

Postby Gripdana » Fri Sep 26, 2014 10:01 pm

Any thoughts? I need to extend the wires I put molex plugs on the switch leads and now need to connect the wires to the MGL harness which is a couple of feet short. Is it better to solder, butt splice, or use molex connectors there also.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm

Re: PTT wires Solder vs crimp

Postby wlarson861 » Fri Sep 26, 2014 11:48 pm

I soldered mine and sealed with shrink tube since I hoped I wouldn't have to disturb the connection for a while.
Bill Larson
N861SX
Sonex, polished, tail wheel, Generation 4 Jabiru 3300
wlarson861
 
Posts: 499
Joined: Wed Dec 05, 2012 11:41 pm


Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 17 guests