Jab 3300 w/Rotec Mk1 question

Jabiru 2200 / 3300 discussions

Jab 3300 w/Rotec Mk1 question

Postby Sonex32 » Mon Apr 04, 2016 4:33 pm

Howdy fellas,

Fired up my Jab powered Panther for the first time last week.

https://www.youtube.com/watch?v=u3RXP4J ... load_owner

Question is where did most end up with the idle mixture setting? From the factory it was set 3/4 turn open. I've backed it out another 3/4 turn and it's a bit better, but still running on the rough side. Any help with the setup appreciated.

thanks,

Tony Spicer
Sonex32
 
Posts: 13
Joined: Thu Mar 27, 2014 4:07 pm

Re: Jab 3300 w/Rotec Mk1 question

Postby andrewp » Mon Apr 04, 2016 5:40 pm

Tony Spicer... I have no value to add here, other than to say it is lovely to see a post from you. Hope your new airplane is as nice as the previous one, and the one before that and of course (particularly) the one before that.

Cheers,

Some Australian Guy
andrewp
 
Posts: 213
Joined: Mon Oct 14, 2013 11:10 pm

Re: Jab 3300 w/Rotec Mk1 question

Postby fastj22 » Mon Apr 04, 2016 7:38 pm

Sonex32 wrote:Howdy fellas,

Fired up my Jab powered Panther for the first time last week.

https://www.youtube.com/watch?v=u3RXP4J ... load_owner

Question is where did most end up with the idle mixture setting? From the factory it was set 3/4 turn open. I've backed it out another 3/4 turn and it's a bit better, but still running on the rough side. Any help with the setup appreciated.

thanks,

Tony Spicer

I went one full turn richer. Idles like a champ now.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High


Return to Jabiru

Who is online

Users browsing this forum: No registered users and 18 guests