SonexBuilders.net

I am having trouble finding # 272 for the gland nut used at the flywheel. Has anyone used anything else with great results? I do have #271. :?:

You can get it on amazon for about $30. I think that Permatex bought out locktite. They have an equivalent but I'm not sure what it is off the top of my head.

Keith
#554

Thanks much Joe! I did find the technical spect of Permatex red #27200 thread locker. It is exactly the same as Locktite 272, both being 450 deg and for items up to 1.5 inches. I should be good to go! and thanks to all the others for info too!

n502pd wrote:I did find the technical spect of Permatex red #27200 thread locker.

Take note of the part numbers of the Permatex thread locker products. They are the old Loctite numbers, followed by a number symbolizing the size of the container you're purchasing! So if you see a Permatex thread locker bottle with a part number that starts "272xx" you're getting the old Loctite 272. Same goes for all the other Loctite numbers. Easy peasy!!