oil

Discussion of the Aerovee kit engine.

oil

Postby Sonex374 » Wed Nov 04, 2015 8:40 am

Just wondering what oil others are using.
Rutter
N374WR (Reserved)
Sonex tri-gear
Polish
Aerovee
Sonex374
 
Posts: 27
Joined: Sun Aug 11, 2013 7:12 am
Location: Wisconsin

Re: oil

Postby Rynoth » Wed Nov 04, 2015 9:27 am

I'm using the Valvoline VR1 20w-50 non synthetic called for in the Aerovee manual. Not too expensive by the case on Amazon.

http://www.amazon.com/Valvoline-822347- ... VR1+20w-50

About $6 a quart.
Last edited by Rynoth on Wed Nov 04, 2015 1:49 pm, edited 1 time in total.
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN

Re: oil

Postby SonexN76ET » Wed Nov 04, 2015 1:36 pm

I too am using Valvolene VR1 20w50 Racing oil. The Aerovee manual specifies the approved oils. You have to have oil that has a high zinc content. Like Ryan, I get mine by the case from Amazon.

Jake
Sonex Tri Gear, Rotax 912 ULS, Sensenich 3 Blade Ground Adjustable Propeller
MGL Velocity EMS, Garmin GTR 200 Comm, GTX 335 ADS B Out Transponder
ILevil AW AHRS & ADS-B In, UAvionix AV20S
200+ hours previously with Aerovee engine
Sarasota, Florida
User avatar
SonexN76ET
 
Posts: 494
Joined: Tue Aug 27, 2013 2:39 pm
Location: Atlanta

Re: oil

Postby rizzz » Wed Nov 04, 2015 5:55 pm

I've been using the Brad Penn Penn-Grade 1 Racing 20w50.
My local VW guy swears by this one.

The Valvoline VR-1 20w50 does not appear to be available in Australia.
Michael
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
rizzz
 
Posts: 869
Joined: Tue Jun 21, 2011 2:07 am
Location: Wollongong, NSW, Australia

Re: oil

Postby mike.smith » Wed Nov 04, 2015 10:46 pm

Rynoth wrote:I'm using the Valvoline VR1 20w-50 non synthetic called for in the Aerovee manual. Not too expensive by the case on Amazon.

http://www.amazon.com/Valvoline-822347- ... VR1+20w-50

About $6 a quart.


Same for me.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm

Re: oil

Postby vwglenn » Thu Nov 05, 2015 9:57 am

For the last 20 years I've been using Castrol GTX 20-50 in my VWs. Haven't had an engine grenade on me yet. I'd go with whatever they recommend for the Aerovee.

Some people swear by synthetic and blends. Most of the guys I've talked to that have used them in VWs have had weeping issues (leaks) because the molecules are supposedly smaller and the tolerances on VW engines aren't as refined as modern engines. Another reason I use conventional oil is the frequency at which I change my oil. Usually 1500-3000 miles. Up until recently, I never ran a filter, only the screen. I reasoned that even expensive synthetic will recirculate the junk that gets by the screen and would be a waste of money as a result.
Glenn
Sonex #600
N889AP
vwglenn
 
Posts: 416
Joined: Mon Sep 15, 2014 1:00 am
Location: 6A2 - South of ATL

Re: oil

Postby andrewp » Thu Nov 05, 2015 11:30 am

I don't have a VW, but I would thought I would drag the Jabiru people into this thread.

Aeroshell 100W + Camguard

Ed Kollins (the dude who made Camguard, designed or whatever) hangs out on the Cessna list. Between him and way many seminars from Mike Busch, Camguard makes a lot of sense paired to a simple oil. No idea if it has any relevance from a VW angle.

Gentlemen, start your flamethrowers.

AP
andrewp
 
Posts: 213
Joined: Mon Oct 14, 2013 11:10 pm

Re: oil

Postby nwyooper » Thu Nov 05, 2015 1:15 pm

I use Valvoline VR-1 20w50 but buy it from a local distributor in Portland, OR. Cost is $4.81 per quart- find a local distributor and they will most likely sell direct to you.
nwyooper
 
Posts: 39
Joined: Sun Dec 15, 2013 10:28 pm

Re: oil

Postby Gripdana » Fri Nov 06, 2015 12:47 am

I use Valvoline VR-1 20w50 as recommended in the Aerovee manual. I buy it from my local auto parts store.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm

Re: oil

Postby Sonex374 » Mon Nov 09, 2015 7:03 pm

Thanks to all for your sharing your info.
Rutter
N374WR (Reserved)
Sonex tri-gear
Polish
Aerovee
Sonex374
 
Posts: 27
Joined: Sun Aug 11, 2013 7:12 am
Location: Wisconsin


Return to Aerovee

Who is online

Users browsing this forum: Bing [Bot] and 33 guests

cron