AeroVee Oil Pump & Oil Bypass Plate Bolts
Posted: Sun Jan 18, 2015 12:56 pmAnyone experience this problem.....
The bolts that came with the ACV-P01-55 Maxi Oil Pump do not screw into the crankcase. Bolts are M8 x 1.25, crankcase hole is M8, but the threads in the crankcase do not match the bolt thread pitch.
Same issue with the single M8 bolt for the ACV-P01-11 Oil Bypass Plate, bolt is ACV-Z01-19, M8 x 1.25, but again the threads in the crankcase do not match the bolt thread pitch.
I will email Sonex tomorrow, just hoping someone has seen this before and knows what the correct bolt thread is.
Terry
Sonex 1508
AeroVee 0736
The bolts that came with the ACV-P01-55 Maxi Oil Pump do not screw into the crankcase. Bolts are M8 x 1.25, crankcase hole is M8, but the threads in the crankcase do not match the bolt thread pitch.
Same issue with the single M8 bolt for the ACV-P01-11 Oil Bypass Plate, bolt is ACV-Z01-19, M8 x 1.25, but again the threads in the crankcase do not match the bolt thread pitch.
I will email Sonex tomorrow, just hoping someone has seen this before and knows what the correct bolt thread is.
Terry
Sonex 1508
AeroVee 0736