funflyingguy wrote:bryan: the only air restriction left in my removed separator is the aluminum plate with about 15 1/8" holes in it. is that where you are at?
Bryan Cotton wrote:That bronze thing is definitely a restriction. I took mine out right away. I did some other mods to try and maximize flow and to get the flow moving down and spiraling around the inside of the can. Not long ago I removed the stainless scrubber pads. They looked fine but seemed to have gunked up a bit and I was leaking oil from the crank exit in the front. You definitely need to eliminate back pressure there.
bvolcko38 wrote:I drilled (8) 1/8" holes in "the bronze thing" in 3 differnt stages, no more leaks or back pressure
Users browsing this forum: No registered users and 2 guests