random user submitted photo
Oil fill access
1 post
• Page 1 of 1
Oil fill access
by Bryan Cotton » Sat Dec 03, 2022 5:45 pm
I drilled and tapped a couple of holes on the edge of the oil cap for 4-40 screws. Then I made/screwed on a handle. I holesawed access above the oil fill. That's a 2 3/8" hole.
I had a few disasters trying to make a cover with the flycutter. Ended up having my son talk me through how to set up the part on our CNC router.
https://www.youtube.com/watch?v=BUq5OGHzZB8
Needs nutplates and screws. Maybe some paint.
I had a few disasters trying to make a cover with the flycutter. Ended up having my son talk me through how to set up the part on our CNC router.
https://www.youtube.com/watch?v=BUq5OGHzZB8
Needs nutplates and screws. Maybe some paint.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5489
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 38 guests
