SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

aerovee

Discussion of the Aerovee kit engine.
Post a reply

aerovee

Postby johnnn » Sat Aug 17, 2019 1:56 pm

Has anyone had problems with the flanged cam bearing not fitting? The bearing seems pinched when I put it on the cam. The pinch is so bad that it is impossible to seat the bearing on the shaft. This is the same bearing the manual wants you to modify by filing off one of the tabs. John
johnnn
 
Posts: 31
Joined: Sun Aug 03, 2014 9:44 pm
Location: Nekoosa, WI
Top

Re: aerovee

Postby Area 51% » Sat Aug 17, 2019 3:45 pm

Not an uncommon problem in aftermarket bearings. The fix, for an engine that will spend it's life on a road, is to polish the end with a piece of fine abrasive cloth. There is a tutorial on You Tube about it.

Mine were tight, so I tried a different set of bearings, and had no issue.
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Re: aerovee

Postby johnnn » Sat Aug 17, 2019 4:58 pm

What is a good source for AeroVee parts? I think purchasing a new cam bearing set is a good idea.
johnnn
 
Posts: 31
Joined: Sun Aug 03, 2014 9:44 pm
Location: Nekoosa, WI
Top

Re: aerovee

Postby Onex107 » Sun Aug 18, 2019 9:40 pm

I had one like that. I think it was a main bearing. It was the result of shipping damage. It was replaced.
OneX 107
N2107X
Onex107
 
Posts: 506
Joined: Mon Mar 24, 2014 6:44 pm
Location: Peoria, IL
Top

Re: aerovee

Postby lutorm » Fri Aug 23, 2019 12:37 am

When I got the parts to rebuild my Aerovee I used CB performance and aircooled.net.
lutorm
 
Posts: 259
Joined: Mon May 15, 2017 1:35 pm
Location: The Island of Hawai
Top

Post a reply

Return to Aerovee

Who is online

Users browsing this forum: No registered users and 18 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

cron