VDO pressure sender

[Onex107]

Has anyone found a source for the 0-80 psi sender that costs less the $50? It's failing at 250 hours.

[WaiexN143NM]

hi all,
Try the swift press sender avbl from aircraft spruce.
#04056 0-150 psi
#04057. 0-100 psi
1/8 npt

WaiexN143NM
Michael

[Onex107]

The MGL EFIS recommends 0-80 psi. and only take one wire to the panel. What's the three wires for on the Swift?

[XenosN42]

250 hours? Count yourself lucky - no very lucky. Buy another VDO.

[WaiexN143NM]

onex 107, all,
the swift has 3 wires, +5v, gnd, and signal. john austin on the zenith site has a detailed posts on how to hook up the swift sender to MGL equipment. posts were last fall.
www.zenith.aero

hope this helps......
u could just buy another vdo for the same price, but expect it to fail again in about 200 hrs.

michael.