Map

Discussion of the Aerovee kit engine.

Re: Map

Postby Bryan Cotton » Sat Nov 07, 2015 3:59 pm

I perused my copies of the Bingeles books but did not find what I tried to describe above. I don't think it is an original idea, but you never know. They say memory is the second thing to go.

A couple buddies built a nice RV7. It has a generously sized oil fill door. They open it after shutdown to let more hot air out. This is a good and simple idea.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Map

Postby marsolgp » Sun Nov 08, 2015 4:47 pm

Ryan,

I read through this thread again and it looked as if you were directing a question to me about any effects the louvers/grates have on the low pressure area behind the engine..... I have not seen any negative effects, CHT's and oil temps are the same, other temps that I monitor back there are identical to the temps before the louvers, only difference is that temperature inside cowling drops quicker once engine is shutdown. And like I've said before, that's got to be good for the electrics that hang out behind the engine.....
G. Marsolais
Waiex w/Turbo Aerovee
Rotec TBI, Sensenich Climb Prop
MGL Xtreme EFIS & EMS
A/P, iFly720 w/ADS-B
marsolgp
 
Posts: 119
Joined: Thu Feb 14, 2013 8:29 pm
Location: Kansas

Previous

Return to Aerovee

Who is online

Users browsing this forum: No registered users and 19 guests

cron