sonex B elevator travel

Discussion for builders, pilots, owners, and those interested in building or owning a second generation Sonex or Waiex.

sonex B elevator travel

Postby pfhoeycfi » Sun May 03, 2020 8:44 am

the plans call for 20 up I get 18, measured from the top surface, thats after trimming, adjusting etc. Is anyone using 18 up, or anything less than the specified 20 without issues?
The torque tube weldment hits the vertical and I've already taken down any excess matl above the weld. My horz stab is 3 - 5/16" fwd of the vert channel placement as specified in the plans.
Peter
Peter Hoey
SEL Pvt, Comm Glider, CFIG, Pawnee & L19 Towpilot
Philadelphia Glider Council
Sonex B SNB0021, N561PH, Taildragger, Aerovee Turbo, MGL MX1, First flight Dec 18, 2022
Also built Sonerai IIL N86PH
pfhoeycfi
 
Posts: 384
Joined: Wed Jun 28, 2017 3:45 pm

Re: sonex B elevator travel

Postby Deano » Thu May 07, 2020 10:02 pm

Peter, check out this thread under "lessons learned" regarding elevator travel if you haven't already.
viewtopic.php?f=65&t=5595#p42385
Dean and Robynn Trzynka
Iron River, Wi
Waiex-B ser# WXB0013
Taildragger
Jabiru 3300
Deano
 
Posts: 12
Joined: Wed Oct 15, 2014 11:37 pm


Return to Sonex-B / Waiex-B

Who is online

Users browsing this forum: Bing [Bot] and 13 guests