#30 vs. #31

Discussion for builders, pilots, owners, and those interested in building or owning a second generation Sonex or Waiex.

#30 vs. #31

Postby Capt T » Sun Sep 08, 2024 2:05 pm

Anyone have experience they wish to share (admit) after having mistakenly up-drilled some leading edge skin and ribs with #30 bit rather than #31 or #32? Will CCC-44 still be adequate when used on leading edge skins up drilled with #30? I am nearly positive someone must have done this.
Capt T
 
Posts: 6
Joined: Wed May 22, 2024 9:00 am

Re: #30 vs. #31

Postby Bryan Cotton » Sun Sep 08, 2024 3:28 pm

I drilled all of mine up to #30 on purpose. They seem fine to me.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77


Return to Sonex-B / Waiex-B

Who is online

Users browsing this forum: No registered users and 4 guests