Page 1 of 1
Onex seat pan
Posted:
Fri Sep 28, 2018 3:14 pmby johnnn
Does anyone have experience in raising the seat pan in a Onex? I'm short and sit too low in my mock-up. John Onex 0179
Re: Onex seat pan
Posted:
Fri Sep 28, 2018 3:26 pmby racaldwell
John,
Low is good. That way you can use thicker cushions to get the height you need and comfort level goes up to boot.
Rick Caldwell
Xenos 0057
Re: Onex seat pan
Posted:
Fri Sep 28, 2018 8:03 pmby merle reppert
I added a sheet of .025 from the bottom rear hinge to the spar ---Using hinges in both places ---Original
seat is not changed ---
i added
Re: Onex seat pan
Posted:
Sat Sep 29, 2018 10:56 amby Onex107
I built mine to plan and sewed up a cushion/bag to fit the tapered seat shape and stuffed it with any material you want to use. It's about six inches thick at the center with a flat top. It puts my head about an inch away from the canopy with a head set on. That way you can also use a flat seat cushion of any thickness you want. I had my seat cushions built by a local upholstry shop. You get to pick the cover material, color, and type of foam rubber for the inside. And, it will fit a tall person in the future.