Clecos too short???

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

Clecos too short???

Postby aferddaberts » Thu Feb 26, 2015 10:46 am

This message is specfially for dhogie about the clecos being too short to reach through several layers ;

Google in "yardstore.com" That is an aircraft supply outfit located in Wichita, Kansas. They stock many kinds and types of clecos, short ones, long ones etc. They also sell used ones for less than half price. Or you can call them up 1 800 888 8991.

AL Roberts
aferddaberts
 
Posts: 64
Joined: Mon Jan 26, 2015 2:07 pm

Re: Clecos too short???

Postby Bryan Cotton » Thu Feb 26, 2015 12:14 pm

I have at least 20 long clecoes for each size. They are indispensable.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5492
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Clecos too short???

Postby dhogue » Thu Feb 26, 2015 3:53 pm

Thanks gents.
yardstore.com has the solution.
Don Hogue
Onex 0173: Tailwheel: AeroVee Turbo.
Horiz/Vert Stabs, Rudder/Elevators, Fwd/IB/OB/Aileron Bellcranks on Ribs and Main Fwd/Aft Center Wing Spars, Fuselage : Complete.
WIP: Wings
dhogue
 
Posts: 71
Joined: Mon Sep 15, 2014 8:39 pm

Re: Clecos too short???

Postby petep » Thu Feb 26, 2015 11:06 pm

Recently finished my spars. Did not have any clecos long enough to span center spar buildup so I clecoed every third at 1/8" on opposite sides. Clamped securely and updrilled the hole between the opposing 1/8" clecoed holes. Actually the hardest part of the spars was drilling the steel pivot fittings and in total they were easier to build that my Sonex & Waiex spars. Came out fine and for my 30 hours work I have $2K to go towards my engine now.

Pete
OneX 128
Sonex 1051
Waiex 69
petep
 
Posts: 80
Joined: Fri Apr 18, 2014 10:02 pm


Return to Onex

Who is online

Users browsing this forum: No registered users and 24 guests