billy's plans built sonex 1735

[sonex1374]

Billy,

The schematic that came with the unit is pretty close to what you drew in your earlier posts, but there is an extra wire (a short jumper between terminals) that seems to be present. If this is just a typo or artifact, then no problem. However, if you actually wire your relay and OV module like I think you've shown, it won't work. See below for more details.

Jeff

[Rofomoto]

Billy,

The schematic that came with the unit is pretty close to what you drew in your earlier posts, but there is an extra wire (a short jumper between terminals) that seems to be present. If this is just a typo or artifact, then no problem. However, if you actually wire your relay and OV module like I think you've shown, it won't work. See below for more details.

IMG_6486.JPG

Jeff

Ahh !!! Your correct on my drawing!! My mistake. Will use the drawing the unit came with. Thanx

[Rofomoto]

Wiring the panel is not my favorite. I think I could build a whole other plane before I get this done. Fuse block added above transponder

[Rofomoto]

Some new not made by me parts

[Rofomoto]

A little cowling work

[Rofomoto]

Bottom cowl tomorrow

[Rofomoto]

[GordonTurner]

Hi Billy

Man, looking awesome!!!!

Question, is a 24” brake sufficient for making these cowling pieces or do I need to be looking for something longer?

Thanks for the help

Gordon

[Rofomoto]

Hi Billy

Man, looking awesome!!!!

Question, is a 24” brake sufficient for making these cowling pieces or do I need to be looking for something longer?

Thanks for the help

Gordon

That’s all I have... if I need longer I sandwich between two longer pieces of wood and bang it over like you make the ribs

[Rofomoto]