random user submitted photo
Scott's Sonex 1629 - N629SX
Re: Scott's Sonex #1629 - Progress
by SonexN76ET » Wed Feb 03, 2016 3:37 pm
Scott, I took a couple of pictures of the Onex nose wheel pant on the factory Onex. I have the older version nosewheel pant on my Sonex that is wider, that uses the brackets. Jeremy had told me that he felt the Onex wheel pant was an improvement and would offer less drag. From your picture, it looks like you have the newer Onex style wheel pant. Here are the pictures from the factory Onex...
Jake
Jake
Sonex Tri Gear, Rotax 912 ULS, Sensenich 3 Blade Ground Adjustable Propeller
MGL Velocity EMS, Garmin GTR 200 Comm, GTX 335 ADS B Out Transponder
ILevil AW AHRS & ADS-B In, UAvionix AV20S
200+ hours previously with Aerovee engine
Sarasota, Florida
MGL Velocity EMS, Garmin GTR 200 Comm, GTX 335 ADS B Out Transponder
ILevil AW AHRS & ADS-B In, UAvionix AV20S
200+ hours previously with Aerovee engine
Sarasota, Florida
-
SonexN76ET - Posts: 494
- Joined: Tue Aug 27, 2013 2:39 pm
- Location: Atlanta
Re: Scott's Sonex #1629 - Progress
by ScottM-Sonex1629 » Sat Feb 06, 2016 7:59 pm
N629SX has moved (again) to the airport, this time the wings made the final journey as well.
Now to finish moving my tools and supplies, and tackle the 1-page punch list!
Talked to Joe at the factory yesterday about scheduling a t-flight session in early March when I will already be in the Chicagoland area.
Good times!
Now to finish moving my tools and supplies, and tackle the 1-page punch list!
Talked to Joe at the factory yesterday about scheduling a t-flight session in early March when I will already be in the Chicagoland area.
Good times!
Scott Meyer
Sonex 1629 - Sold...9/2019
Sonex 1629 - Sold...9/2019
- ScottM-Sonex1629
- Posts: 441
- Joined: Sun Aug 11, 2013 10:00 pm
- Location: Dublin, Ohio (MRT)
Re: Scott's Sonex #1629 - Progress
by Concorde » Sat Feb 06, 2016 8:39 pm
Congratulations Scott.
Ben
Sonex # 1684
Tri-Gear, Dual Control
Rotax 912uls
N379BS reserved.
Sonex # 1684
Tri-Gear, Dual Control
Rotax 912uls
N379BS reserved.
- Concorde
- Posts: 176
- Joined: Sun Aug 10, 2014 2:11 pm
- Location: North Carolina
Re: Scott's Sonex #1629 - Progress
by ScottM-Sonex1629 » Fri Feb 26, 2016 8:15 pm
Making some progress with final assembly! Wings are on, and the Nav/strobe lights work!
https://youtu.be/4z2ChykGB7s
https://youtu.be/4z2ChykGB7s
Scott Meyer
Sonex 1629 - Sold...9/2019
Sonex 1629 - Sold...9/2019
- ScottM-Sonex1629
- Posts: 441
- Joined: Sun Aug 11, 2013 10:00 pm
- Location: Dublin, Ohio (MRT)
Re: Scott's Sonex #1629 - Progress
by Bryan Cotton » Fri Feb 26, 2016 9:44 pm
Looks cool! I like the new LED light technology.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5489
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Scott's Sonex #1629 - Progress
by Sonex1462 » Fri Feb 26, 2016 10:17 pm
Looks great.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Sonex1462
- Posts: 135
- Joined: Thu May 16, 2013 8:08 pm
-
kevinh - Posts: 372
- Joined: Mon Feb 23, 2015 10:46 pm
- Location: San Mateo, CA
Re: Scott's Sonex #1629 - Progress
by ScottM-Sonex1629 » Mon Mar 07, 2016 8:59 pm
Steadily making progress towards completion! Crossing items off my punch list feels good!
Over the past few weeks my son and I have installed the wings, and gotten all of the bolts on and cotter pinned in place. Tip strobe/LEDs are installed and functioning.
Today I got the landing light wired in, and I get to make a second attempt at trimming the lense (messed up the first one after tanking the 6 months break and completely trimming away the excess plexi around the opening pattern I traced last summer -- oops).
Wing root doubler and wing walk is trimmed, and installed with the VANS rubber seal.
Last big project is the surgery on the nose wheel pant. I am very close to having this finished. Ended up with a nice two piece wheel pant that will be removable without taking the nose strut off the engine mount.
Finishing up the painting/vinyl on the ailerons and then balancing these before installation:
Later this week I am heading to Oshkosh to conduct T-Flight training with Joe Norris. Looking forward to this valuable experience, and also getting my paper work submitted to the FAA sometime this month!
Over the past few weeks my son and I have installed the wings, and gotten all of the bolts on and cotter pinned in place. Tip strobe/LEDs are installed and functioning.
Today I got the landing light wired in, and I get to make a second attempt at trimming the lense (messed up the first one after tanking the 6 months break and completely trimming away the excess plexi around the opening pattern I traced last summer -- oops).
Wing root doubler and wing walk is trimmed, and installed with the VANS rubber seal.
Last big project is the surgery on the nose wheel pant. I am very close to having this finished. Ended up with a nice two piece wheel pant that will be removable without taking the nose strut off the engine mount.
Finishing up the painting/vinyl on the ailerons and then balancing these before installation:
Later this week I am heading to Oshkosh to conduct T-Flight training with Joe Norris. Looking forward to this valuable experience, and also getting my paper work submitted to the FAA sometime this month!
Scott Meyer
Sonex 1629 - Sold...9/2019
Sonex 1629 - Sold...9/2019
- ScottM-Sonex1629
- Posts: 441
- Joined: Sun Aug 11, 2013 10:00 pm
- Location: Dublin, Ohio (MRT)
Scott's Sonex #1629 - Progress
by Sonex1462 » Mon Mar 07, 2016 9:11 pm
Looking good.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Sonex1462
- Posts: 135
- Joined: Thu May 16, 2013 8:08 pm
Re: Scott's Sonex #1629 - Progress
by Bryan Cotton » Mon Mar 07, 2016 9:52 pm
Scott that is awesome. Glad you got back in the game! Man that was close!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5489
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Who is online
Users browsing this forum: No registered users and 16 guests
