Last edited by Bryan Cotton on Sun Jan 07, 2024 12:15 am, edited 1 time in total.
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
I think I figured out why the youtube previews would not show. You need to cut out the junk including and after the ? in the link.
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Weatherpilot wrote:Another great video. Thanks for sharing!
Happy New Year too!
Thanks Greg!
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Screenshot_20240118-094621-771.png (618.52 KiB) Viewed 154717 times
Screenshot_20240118-093832-566.png (571.11 KiB) Viewed 154717 times
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Weatherpilot wrote:A great story and great accomplishment. Thank you for sharing.
Greg.
Thanks Greg!
Working on the extra credit parts of the annual. Our mounts had sagged a little over time. I've reshimmed it so it is a little up, and a little left. The left is to reduce the amount of left pedal required on takeoff, a little bit anyway. We have run out of left pedal with a right crosswind before.
Getting to this point is a pain!
Screenshot_20240130-202654-093.png (608.35 KiB) Viewed 153788 times
Screenshot_20240130-215944-926.png (468.11 KiB) Viewed 153788 times
Next up I'm pulling the engine to reseal the flywheel. And I'm going to safety the starter bolts.
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
We have been down for over a month, but I finished and signed off the annual last night. This was yesterday's ground run.
That ground run was yesterday. We had another about a week ago and I had the needle way too rich. After the first ground run, I had 2 drops of oil on the floor. After the second, I didn't have to clean up any oil. I am cautiously hopeful that the work on the flywheel, the new rear main seal, and resealing the oil pump has made a significant improvement. Now we just need to fly it.
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23