Cruising the neighborhood

For non Aviation related discussions.

Re: Cruising the neighborhood

Postby Bryan Cotton » Sun Sep 07, 2014 8:16 am

No pictures, but last night a neighbor invited everybody over to look at Saturn and some deep space objects. He has a little observatory between his house and hangar. We saw Saturn, its rings, and Titan. Then he aimed at cluster M13. Lots of stars. Another neighbor set his telescope up on the ramp so we could look at the moon. Had never seen the moon through a scope before. Man that is cool.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby Bryan Cotton » Sat Sep 13, 2014 4:32 pm

Not quite the neighborhood- a bit north in Janesville Wisconsin where we went to a water ski show. They had a Robbie (R44 Astro, not Culver) giving rides for $20 a head. I had always hoped to get recurrent some day and take the boys but that seems more unrealistic as time goes on.
Image

So, with Adam in front, Matthew and I in the back, off we went.
Image

Helicopters are still the coolest means of aviation. I miss them.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby Bryan Cotton » Sat Sep 20, 2014 1:17 pm

Mixmaster. We used a 337 gear retraction mechanism on the X2 with Ti legs.
Image
This was on our morning bike ride.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby Bryan Cotton » Fri Oct 03, 2014 6:04 pm

Some wings laying on the grass. May have been early Sonex prototypes.
Image
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby Bryan Cotton » Sat Oct 11, 2014 1:24 am

We are sleeping in a different airport neighborhood tonight. KRFD with a zillion other Boy Scouts for Aircamp. Here is a project I would like to get Matthew into. These guys licensed the tri-flyer plans to Popular Mechanics when they were still cool:
Image


It is cold!
Image
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby Bryan Cotton » Fri Dec 19, 2014 7:48 pm

The poor harley golf cart has not been out in a long while. It is busy storing wood in the warmish hangar. I stopped by to turn on the heat so it would be warmer when I came back from getting gas. Saw this Pawnee on the way out:
Image
I have more hours in Pawnees than any other single type. Miss flying them dearly. I towed gliders, I was never a cropduster.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby Bryan Cotton » Mon Feb 09, 2015 12:52 am

The guys always have a lot of work clearing off the airport. A lot of the snow ends up by my hangar. We spend a bunch of time on these snow piles and when the conditions are right you can make a heck of a fort.
Image
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby Bryan Cotton » Thu May 21, 2015 9:18 pm

Here Adam is cleverly disguised as a traffic cone. We were out skating and saw this Skybolt. They went up and flew some acro over the airport.
Image
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cruising the neighborhood

Postby SonexN76ET » Thu May 21, 2015 9:40 pm

That picture reminds me of where I lived during high school at Brookridge airpark near Downers Grove. My neighbor had just finished building a Christen Eagle.

Thanks,

Jake
User avatar
SonexN76ET
 
Posts: 494
Joined: Tue Aug 27, 2013 2:39 pm
Location: Atlanta

Re: Cruising the neighborhood

Postby Bryan Cotton » Thu May 21, 2015 11:18 pm

I hope my kids have fond memories of airpark life! I just need to get back to flying.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

PreviousNext

Return to Off Topic

Who is online

Users browsing this forum: No registered users and 7 guests