1/16" Spring Loaded Drill Stop
Posted: Thu Feb 29, 2024 8:38 pmSo I needed a 1/16" spring loaded drill stop similar to the stops I have for #40 and #30 bits.
So off to the specialty hardware store (website).
NOPE!
Found a spring in my bag of tricks, and a 3/8" dowel and made one. I've made drill stops on jobs it's for years, but this is my first spring loaded one. It works perfectly. Took less than 20 minutes.
So off to the specialty hardware store (website).
NOPE!
Found a spring in my bag of tricks, and a 3/8" dowel and made one. I've made drill stops on jobs it's for years, but this is my first spring loaded one. It works perfectly. Took less than 20 minutes.