Princeton Fuel Probe
Posted:
Mon May 02, 2016 7:02 pmby sonex569
Looked up old wiring for the Princeton fuel probe. Might be of some help.
Regards
Sonex569
Princeton Fuel Probe
Posted:
Mon May 02, 2016 8:08 pmby Sonex1517
Thanks
Apparently the additional wire is for resistive measurement.
I calibrated it yesterday, it seemed to work and showed the correct LED indications and the Belite fuel gauge registered full. I powered down, waited, powered it up, and the fuel gauge showed empty.
The Princeton probe LEDs still show the correct indication.
Back to square one.
Robbie Culver
Sonex 1517
Chicagoland
N1517S
Re: Princeton Fuel Probe
Posted:
Mon May 02, 2016 8:19 pmby fastj22
Sonex1517 wrote:Thanks
Apparently the additional wire is for resistive measurement.
I calibrated it yesterday, it seemed to work and showed the correct LED indications and the Belite fuel gauge registered full. I powered down, waited, powered it up, and the fuel gauge showed empty.
The Princeton probe LEDs still show the correct indication.
Back to square one.
Robbie Culver
Sonex 1517
Chicagoland
N1517S
Ain't it great? Welcome to world of troubleshooting electronic fuel flow instruments. Let us know if you figure it out.