SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Tape seals

Discuss painting, polishing, or painting vs polishing.
Post a reply

Tape seals

Postby bvolcko38 » Mon Apr 08, 2019 9:25 am

Can someone recommend a tape to seal the gaps between wings and fuselage, stab and fuse, stab and tips, wings and tips, gear fairings etc etc? Thanks
Bill Volcko XNS0068
Xenos A N68WV 99% flush rivets
Aerovee and Prince P-Tip
MGL Discovery Lite w/ Sandia STX 165R
V6
First hole 4/1/16
First flight 8/24/18
Phase I complete...finally!!!
Also flying a Challenger II since 1999
User avatar
bvolcko38
 
Posts: 284
Joined: Fri Feb 19, 2016 7:40 am
Location: Finger Lakes
Top

Re: Tape seals

Postby Bryan Cotton » Mon Apr 08, 2019 10:29 am

I'm using electrical tape much like on my former L33 and SGS 1-35C.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Tape seals

Postby NWade » Mon Apr 08, 2019 3:02 pm

Lots of widths of Gap Seal tape to choose from on Wings & Wheels (well-known glider supply shop):
https://wingsandwheels.com/tapes-seals/ ... -tape.html

Enjoy,
—Noel
NWade
 
Posts: 527
Joined: Mon Aug 08, 2011 3:58 pm
Top

Re: Tape seals

Postby Skippydiesel » Sat Sep 18, 2021 1:25 am

NWade wrote:Lots of widths of Gap Seal tape to choose from on Wings & Wheels (well-known glider supply shop):
https://wingsandwheels.com/tapes-seals/ ... -tape.html

Enjoy,
—Noel



Yes ! good stuff - I use it on flat or near flat adjoining surfaces - not much good for 90 degree surfaces, where I use draft excluder.

You can find a wide range of draft excluder in your local hardware. Mostly self adhesive, comes in a wide range of profiles, densities, thickness & some colour choices. best of all, being a non aviation product its relativly cheap. Keeps the weather, insects, wind noise out.
Skippydiesel
 
Posts: 799
Joined: Tue Jul 06, 2021 6:24 am
Top

Post a reply

Return to Finish methods

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.