Supplier for Fairlead Bushings, for aft fuse formers

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.

Supplier for Fairlead Bushings, for aft fuse formers

Postby Barry63 » Tue Aug 10, 2021 1:54 pm

I have been searching for a supplier for the Fairlead Assemblies for the aft fuse formers. These are the 1/4" ID by 3/4" OD split nylon bushings. Also looking for the hard, black nylon snap in bushings for the aft fuse formers and the 1" OD by 7/8" ID snap in bushings for the elevator pushrod supports. ACS sizes aren't large enough. Looked at McMaster-Carr but didn't find any there either. Where have you scratch builders been sourcing these from?

Thanks, Barry
Barry Leap
Mostly scratchbuild Sonex T/D
Jabiru 2200?
Barry63
 
Posts: 33
Joined: Sun Sep 13, 2020 7:30 am

Return to Sonex

Who is online

Users browsing this forum: Google [Bot] and 13 guests