SonexBuilders.net

Hello All,
I introduced myself in a previous post, I have an almost completed tricycle gear Sonex I want to convert to a taildragger. I have searched the forum, but not found exactly what I want, so I'll ask.

Looking at the plans, it appears that this is relatively simple. The bottom aft fuselage is not installed yet so I have access to the interior of the tail, no problem. Order/fabricate tailwheel mount parts, and tailwheel assembly.

The conventional main gear attach to the engine mount, so that part is as simple as ordering a new engine mount, gear legs, etc.

Looking at the existing main tricycle gear mounts in the fuselage, under the seat, it seems like a bit of work to remove them, with not much to gain except loosing a bit of weight. Am I correct in thinking to simply fabricate plugs for those holes and be done with it?

This doesn't look all that difficult, am I missing something?

Thanks, RT

Weight alone might be sufficient reason to remove the old mounts. Also cleans things up a bit giving more open area to fit other items and or storage.

David A.

rwthomas1 wrote:Hello All,
I introduced myself in a previous post, I have an almost completed tricycle gear Sonex I want to convert to a taildragger. I have searched the forum, but not found exactly what I want, so I'll ask.

Looking at the plans, it appears that this is relatively simple. The bottom aft fuselage is not installed yet so I have access to the interior of the tail, no problem. Order/fabricate tailwheel mount parts, and tailwheel assembly.

The conventional main gear attach to the engine mount, so that part is as simple as ordering a new engine mount, gear legs, etc.

Looking at the existing main tricycle gear mounts in the fuselage, under the seat, it seems like a bit of work to remove them, with not much to gain except loosing a bit of weight. Am I correct in thinking to simply fabricate plugs for those holes and be done with it?

This doesn't look all that difficult, am I missing something?

Thanks, RT

I converted mine. Left the weldments for the main gear in place. Yes weight penalty. But removing will cause trauma. I’m converting to B model and scavenged the weldments from the old fuse to give to another builder. Ended up using a grinder to cut the rivets heads. If going tri to tail, leave them in place.

I think the main gear legs are longer on the taildragger!


Sent from my iPhone using Tapatalk

Yes, the taildragger legs are longer, so you'll need new ones.

What engine are you using? I have a new Aerovee TD mount I don't need, I'd be happy to have someone put it to good use. Shipping would be the challenge.

Joe in SE Mich
Waiex 181
Fuselage on gear
Corvair 2.7

I have tricycle gear and tail wheel and motor mount. Will trade for your main gear mounts.
Mike
wav8tor@aol.com


Sent from my iPhone using Tapatalk

I sold most everything with the FWF package. The only thing left is the actual main gear welded steel mounts in the fuselage. I had intended to just leave them be as removing them requires drilling out rivets in a fuselage that is already painted. I know I can get them out, I disassembled a flap with rodent damage, just because. But sometimes it's better not to mess with stuff?

If you will remove the main tricycle gear mounts I will pay $100 plus shipping to Indiana
Mike wav8tor@aol.com
Phone 317-339-7781


Sent from my iPhone using Tapatalk