Sonex fuel filler "drool cup" for sale
Posted: Sun Mar 18, 2018 3:09 pmHi ya'll,
So a while back I decided to print a little cup to fit in on the sonex fuel tank neck (classic - I assume B models are different). To keep gas out of the cockpit in the case of a filling oops. It was designed to print in flexible filament which is great because it perfectly fits my plane. But it might not fit others and printing with flexible filaments is a real PITA so I couldn't really offer to print them for others.
So last night I decided to try a slightly different design. It has the following benefits:
* It just pops with enough free space to allow it to fit into an already finished Sonex
* Fits fairly tight to the neck, so you can just leave it installed all the time
* No need to attach a drain line, if you do happen to spill some gas just pop it out and dump it on the ground
* It should clear the vent line, but if you see any problems fitting on your plane just let me know
* Printed in PETG which is pretty fuelproof
I'll be printing a few of these up and selling them (mainly to pay for my hassle in printing and to donate some money). If you want one send me a PM with your address and paypal me $40. That $40 includes shipping and $5 donation to this site and a $5 donation to the sonex pilot association. If you don't like it just tell me you destroyed it and I'll give a refund of all but the shipping and the donations. Ideally the first customer would try it on their flying plane and if they want tweaks let me know and I'll tweak the design...
So a while back I decided to print a little cup to fit in on the sonex fuel tank neck (classic - I assume B models are different). To keep gas out of the cockpit in the case of a filling oops. It was designed to print in flexible filament which is great because it perfectly fits my plane. But it might not fit others and printing with flexible filaments is a real PITA so I couldn't really offer to print them for others.
So last night I decided to try a slightly different design. It has the following benefits:
* It just pops with enough free space to allow it to fit into an already finished Sonex
* Fits fairly tight to the neck, so you can just leave it installed all the time
* No need to attach a drain line, if you do happen to spill some gas just pop it out and dump it on the ground
* It should clear the vent line, but if you see any problems fitting on your plane just let me know
* Printed in PETG which is pretty fuelproof
I'll be printing a few of these up and selling them (mainly to pay for my hassle in printing and to donate some money). If you want one send me a PM with your address and paypal me $40. That $40 includes shipping and $5 donation to this site and a $5 donation to the sonex pilot association. If you don't like it just tell me you destroyed it and I'll give a refund of all but the shipping and the donations. Ideally the first customer would try it on their flying plane and if they want tweaks let me know and I'll tweak the design...