Page 1 of 1
Setting up AeroVee engine mount
Posted:
Mon Jan 02, 2017 1:01 pmby sonexsteve
Hi everyone, some ideas please on how to set up the engine mount correctly onto the mounting brackets? SNX-P31 has 3 required dimensions, but I'm struggling to find a method of establishing them.
Any ideas welcome!
Steve Moody
Leamington Spa, England
Sonex #1383, AeroVee #0847
Re: Setting up AeroVee engine mount
Posted:
Mon Jan 02, 2017 1:24 pmby kmacht
It's been a while but I seem to remember using plum bobs and chalk marks on the floor for left/right and in/out. Don't remember how I set up/down.
Keith
#554
Re: Setting up AeroVee engine mount
Posted:
Mon Jan 02, 2017 1:45 pmby Bryan Cotton
Re: Setting up AeroVee engine mount
Posted:
Tue Jan 03, 2017 6:49 pmby sonexsteve
Keith and Bryan....a big thank you, very useful info, just what I was looking for. Steve M.
Re: Setting up AeroVee engine mount
Posted:
Tue Jan 03, 2017 11:12 pmby Bruce593SX
if you think thats fun, try welding one from scratch, dont even remember how I did it, but it worked out...