Page 1 of 1
gluing canopy
Posted:
Wed Jun 10, 2015 10:02 amby jack schurr
Hello to the group:
I have decided that I would like to use the Sika method of bonding the canopy. I remember seeing somewhere that the primer was available in smaller quantities. I would like to avoid throwing material out. Anybody have a source?
Thank you,
Jack Schurr
120YX
Re: gluing canopy
Posted:
Mon Aug 10, 2015 8:40 amby jack schurr
A friend who glued his canopy two years ago gave me the primer, activator and sealant. The sealant is solid. I won't use the primer and will buy new. Does the activator go bad, or should I just get that also?
Thanks,
Jack Schurr
120YX
Re: gluing canopy
Posted:
Tue Aug 11, 2015 8:21 amby DCASonex
I used the Stika for bonding, #295 adhesive, 206 G&P primer, 205 activator, and #209 primer. Obtained from Merritt Marine Pompano Beach FL. That was back in 2011 and may be better sources now. All of those components have a definite limited shelf live of just a few months. For anyone interested, have photos and drawings of that installation with slightly modified frame on the old Yahoo Sonex Builder's forum: Files section: Modifications to Sonex #1327. Can e-mail to anyone not able to access that site. So far it has held up great. Stika stuff is made for boats that sit outside full time, and they do recommend a UV blocking paint applied over the outside covering the adhesive, but my plane is stored in a hangar and I did not do that.
David A.
Re: gluing canopy
Posted:
Wed Aug 12, 2015 8:51 amby jack schurr
Hello David:
Please email photos and drawings to me. I' would like as much info as possible before I proceed.
Thanks,
Jack