by Sonerai13 » Sun Dec 10, 2023 12:51 pm
I believe you posted this same question on the Sonex Builders FaceBook page, and I will give you the same answer here as I did there (with a bit more detail)...
If I were building the airplane, I would go with Aerobatic ailerons. Not so much for any added roll response (since the standard ailerons are plenty light and responsive) but more for the better match of the flaps with the airframe. I really like the landing performance of the shorter flaps. This is likely a personal feel/preference issue, but then, anyone's answer to your question will come down to personal preference.
I flew all the factory prototypes during my time as a Sonex employee, and my very favorite airplanes in the fleet were the tailwheel Onex (for absolute best performance/handling balance), SX-1 (the original Sonex prototype, with its 3300 Jabiru engine, it was a real rocket ship), and the Acro Sonex (especially with the turbo engine. Best handling Sonex and almost as good on performance as SX-1). They are ALL great airplanes, but those were my personal favorites.
Joe Norris
Sonex N208GD (S/N 450)
Sonerai II N13NN (S/N 1206)
Fortes Fortuna Adiuvat