Need to replace Sonex windscreen in near future.

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.

Need to replace Sonex windscreen in near future.

Postby bakfly » Wed Mar 25, 2015 1:14 am

Hi all,

A while ago I spilt aviation fuel over the front edge of my Windscreen. I would like to replace it one day (it is not urgent). I have been looking for Lexan material in Australia, but I have not found any yet. Getting it from Sonex cost a fortune on shipping.
Can somebody give my the exact material code for the Lexan and colour. Maybe some builder still have the protected cover with the material code on it. If I can't get it in Australia I might be able to buy a sheet or halve sheet in Holland (Lexan is also made in Holland) on my next Family visit this year and bring it back with me to Australia.

Thanks

Peter Bakker
Sonex 19-8464, Aerovee 2.1
South Australia
bakfly
 
Posts: 40
Joined: Fri Aug 03, 2012 5:30 am

Re: Need to replace Sonex windscreen in near future.

Postby ccm » Wed Mar 25, 2015 4:22 am

You are looking for 3mm thick bronze tint polycarbonate sheet (as it says on the plans.) Lexan is a brand name for polycarbonate.
Craig Miller
Sonex 1526
Standard gear, AeroVee
http://kdmiller.unospace.net/mediawiki/index.php?title=Main_Page
ccm
 
Posts: 24
Joined: Mon Apr 30, 2012 6:22 pm
Location: West Sussex, England, UK

Re: Need to replace Sonex windscreen in near future.

Postby Brett » Wed Mar 25, 2015 5:20 am

I have replaced the poly carb on my doors of my current plane b4 due to a fuel spill. The local plastic shop has always had it in stock. The material was also 3mm but was a clear version. In Geraldton W.A the shop was called Vortex plastics.
Sonex 1645
VH-VWS
Tailwheel
Former Aerovee Turbo
Rotax 912
Brett
 
Posts: 269
Joined: Tue Apr 08, 2014 3:49 am
Location: Geraldton W.A Australia

Re: Need to replace Sonex windscreen in near future.

Postby jaywa » Wed Mar 25, 2015 5:51 am

Peter

I replaced the another Sonex's windscreen located here ( Bunbury WA , OZ ) due to impact breakage during the building stage with locally available clear polycarbonate sheet ( but clear ) ; they will have to do it again because of mogas crazing!

Try your local industrial plastics supply shop
jaywa
 
Posts: 20
Joined: Thu May 15, 2014 12:17 am
Location: Western Australia

Re: Need to replace Sonex windscreen in near future.

Postby tonyr » Wed Mar 25, 2015 5:53 am

Peter,

Google "makrolon polycarbonate 3mm sheet" bronze tint (rare as rocking horse poo in Aust.) Grey tint or clear seems all that's available now
I havent been able to find the emails from when I managed to source a sheet some 6 years ago so can't dig out the supplier I got in from.. they were in Melbourne

Cheers
Tony

PS There are also different types of flat sheet.. UV has an ultraviolet resistant coating. GP is General Purpose.. I ended up with UV which probably cost more as I said it was for an outdoor project. silly me.
Sonex #813
First Flight... 4 Oct 14
298 hours having fun!
http://sonexaus.wikispaces.com/Tony+%28Richo%29+Richardson+Sonex+813
User avatar
tonyr
 
Posts: 200
Joined: Thu Jun 27, 2013 12:50 am

Re: Need to replace Sonex windscreen in near future.

Postby bakfly » Mon Mar 30, 2015 6:27 pm

Thank you all for your useful reply, I still looking for an supplier in Australia. If I am not able to get it Locally, I will take some Lexan back from Holland on my next family visit. It is widely used over there.

Cheers

Peter
Sonex #1430
First Flight 9 October 2014
33hrs in the Air.
bakfly
 
Posts: 40
Joined: Fri Aug 03, 2012 5:30 am

Re: Need to replace Sonex windscreen in near future.

Postby rizzz » Sun Jun 04, 2017 7:29 pm

I managed to spill (quite a bit of) fuel on the windscreen a few weeks ago, we all know what happens after that. Within 30 seconds I had spider cracks coming from all of the affected bolt holes and edges...

In the meantime I replaced the windscreen with a grey-tinted polycarbonate sheet as the bronze tint seems to be impossible to find here in Australia.
It will do for now but I find it to be too dark and would like to go back to a bronze tint at some stage.

Have any Australian builders out there managed to find a local source for the bronze tinted sheet or would anybody have a spare windscreen lying around they'd be willing to sell?
Michael
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
rizzz
 
Posts: 869
Joined: Tue Jun 21, 2011 2:07 am
Location: Wollongong, NSW, Australia

Re: Need to replace Sonex windscreen in near future.

Postby peter anson » Mon Jun 05, 2017 7:47 am

Hi Peter, I would guess that getting clear polycarbonate sheet in Adelaide would be no problem and that's probably not a bad option. In Vic I have bought clear polycarbonate from EPlas http://www.eplas.com.au/ and my guess is that some sort of tint would be available. In Sydney, http://www.allplastics.com.au/ advertise clear and tinted polycarbonate sheet.

Peter Anson
peter anson
 
Posts: 558
Joined: Thu Jul 31, 2014 2:34 am
Location: Mount Macedon, Australia

Re: Need to replace Sonex windscreen in near future.

Postby Brett » Sat Aug 29, 2020 10:00 am

So just digging this old thread up,

I did what I always hoped I wouldn't. I spilt fuel on the windscreen.

Did anyone in Australia end up finding a source of the Bronze polycarbonate?

Mines not too bad now but I'm sure it will grow worse overnight.
Sonex 1645
VH-VWS
Tailwheel
Former Aerovee Turbo
Rotax 912
Brett
 
Posts: 269
Joined: Tue Apr 08, 2014 3:49 am
Location: Geraldton W.A Australia

Re: Need to replace Sonex windscreen in near future.

Postby WaiexN143NM » Sat Aug 29, 2020 4:26 pm

hi all,
sorry to hear about your misfortune. good luck finding a bronze tint. i think is good to keep the front piece lexan for bird strikes. do they have a home improvement store like home depot in oz land?

i always carried a towel. all of the posters on this subject got me worried, i think something non absorbant and cant blow around in the wind. im thinking now a thin piece of rubber that can be rolled up and stored in back baggage area.
maybe some of you have a better idea.

WaiexN143NM
Michael
WaiexN143NM
 
Posts: 1206
Joined: Mon Sep 15, 2014 1:04 am
Location: palm springs CA

Next

Return to Sonex

Who is online

Users browsing this forum: No registered users and 56 guests