SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

MGL EGT SENDER

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges
Post a reply

MGL EGT SENDER

Postby pfhoeycfi » Sun Dec 13, 2020 10:28 am

I do not have the MGL EGT senders yet was wondering if anyone could confirm the probe hole drill size. From what I have seen it might be 1/4". I emailed the MGL rep ...no response.

Peter
Peter Hoey
SEL Pvt, Comm Glider, CFIG, Pawnee & L19 Towpilot
Philadelphia Glider Council
Sonex B SNB0021, N561PH, Taildragger, Aerovee Turbo, MGL MX1, First flight Dec 18, 2022
Also built Sonerai IIL N86PH
pfhoeycfi
 
Posts: 384
Joined: Wed Jun 28, 2017 3:45 pm
Top

Re: MGL EGT SENDER

Postby pilotyoung » Sun Dec 13, 2020 10:42 am

Michigan Avionics took over support for MGL some months ago. Did you e-mail Adam there?
pilotyoung
 
Posts: 188
Joined: Fri Jun 07, 2019 7:31 am
Top

Re: MGL EGT SENDER

Postby pfhoeycfi » Sun Dec 13, 2020 11:47 am

pilotyoung wrote:Michigan Avionics took over support for MGL some months ago. Did you e-mail Adam there?


I emailed the main contact address at Michigan not him specifically.
Peter Hoey
SEL Pvt, Comm Glider, CFIG, Pawnee & L19 Towpilot
Philadelphia Glider Council
Sonex B SNB0021, N561PH, Taildragger, Aerovee Turbo, MGL MX1, First flight Dec 18, 2022
Also built Sonerai IIL N86PH
pfhoeycfi
 
Posts: 384
Joined: Wed Jun 28, 2017 3:45 pm
Top

Re: MGL EGT SENDER

Postby Stevetin » Tue Dec 15, 2020 3:33 pm

I have the MGL EGT thermocouples in my Aerovee engine. I purchased them from Aircraft Spruce (11-07842). The probes are 5mm but the holes in the exhaust pipes are 13/64". Hope this helps.
Steve
Stevetin
 
Posts: 26
Joined: Fri Jul 17, 2020 9:08 am
Top

Re: MGL EGT SENDER

Postby pfhoeycfi » Tue Dec 15, 2020 4:17 pm

Stevetin wrote:I have the MGL EGT thermocouples in my Aerovee engine. I purchased them from Aircraft Spruce (11-07842). The probes are 5mm but the holes in the exhaust pipes are 13/64". Hope this helps.
Steve


Perfect...

Thanks

Peter
Peter Hoey
SEL Pvt, Comm Glider, CFIG, Pawnee & L19 Towpilot
Philadelphia Glider Council
Sonex B SNB0021, N561PH, Taildragger, Aerovee Turbo, MGL MX1, First flight Dec 18, 2022
Also built Sonerai IIL N86PH
pfhoeycfi
 
Posts: 384
Joined: Wed Jun 28, 2017 3:45 pm
Top

Post a reply

Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 16 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.