Dynon D180 Remote Compass (EDC-D10A)

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges

Dynon D180 Remote Compass (EDC-D10A)

Postby RodgerC » Tue Jul 24, 2012 8:24 am

Hello fellow Dynon D180 users

Can anyone who has successfully mounted their remote compass in conjunction with a D180 fitted to the standard sloping panel, provide me with hints or tips on how you achieved the angular alignment between the two components.

Thanks in advance
Rodger Waiex #155
RodgerC
 
Posts: 77
Joined: Sat Jan 14, 2012 4:27 pm

Re: Dynon D180 Remote Compass (EDC-D10A)

Postby N111YX » Wed Jul 25, 2012 9:18 pm

Rodger, a digital level did the trick for me...:)
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Dynon D180 Remote Compass (EDC-D10A)

Postby RodgerC » Thu Jul 26, 2012 5:52 am

Thanks Kip.
RodgerC
 
Posts: 77
Joined: Sat Jan 14, 2012 4:27 pm

Re: Dynon D180 Remote Compass (EDC-D10A)

Postby N111YX » Thu Jul 26, 2012 8:40 am

Here's a pic. I used aluminum rivets to minimize interference. Works great...

RodgerC wrote:Thanks Kip.
Attachments
YX487.JPG
YX487.JPG (82.76 KiB) Viewed 3352 times
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA


Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 7 guests