IS THERE A VIDEO DETAILING BUILDING SONEX WING?

[AlFromNY]

One thing I noticed when I received my tail kit in October, was that the plans were merely blueprints. With almost no idea how to begin, I was quite relieved to find (or perhaps someone in SonexBuilders linked me) the Youtube.series SONEX TAIL KIT STEP BY STEP BUILD.
I've watched each video at least twice and have just started doing actual work on the tail, and I was wondering . . .

IS THERE A SIMILAR VIDEO FOR BUILDING THE WING?
FUSELAGE?
ENGINE IONSTALLATION?
INSTRUMENT INSTALLATION?

Alan K.

[Bryan Cotton]

Here is what I got:
https://youtu.be/nKzzFVhmJ0E?si=nl-gJchbadecbd0B

https://youtu.be/tgXf2Ug1XF4?si=txftKu3tgbTlmA2i

https://youtu.be/hdVYxRO9QU8?si=cZBH9DCky20gMUw3

https://youtu.be/WRm2FkR8huo?si=xTHcWgJbLp_496m5

https://youtu.be/Xa4O4vRuJrU?si=LWqZSXb7IEZ-kT44

https://youtu.be/s2a_0ojRfDM?si=1GxwXHYb_ZFJGIPd

The plans really are useable. Videos are ok but I'd make the effort to understand the plans.

[Area 51%]

[quote="AlFromNY"]One thing I noticed when I received my tail kit in October, was that the plans were merely blueprints. With almost no idea how to begin,

Look at the building tree. Any box with a single line coming from it indicates those boxes need to be completed before moving on as they contain sub-assemblies for the next box up the tree.
Those single-line boxes can be completed in any order and the assemblies stored till needed.

[lakespookie]

I stream my builds every saturday afternoon, and am currently working on wings, if you stop in i can answer any questions on how to read the plans etc and show you some wing components and what not, I am pretty close to closing out the 2nd wing so keep that in mind, and i will taking a vacation late December. until early january.

[AlFromNY]

Thanks, Lakespookie, but California's a little far; and thanks for the links Bryan Cotton, I guess I will have to figure it out from the plans. I imagine that should get a lot easier as I progress with the tail kit. The Building the Sonex Tail Kit video, however, was quite valuable.

[mike.smith]

One nice thing about the plans is you basically stay on one page and finish everything before moving to the next page. Sonex has a strange way of ordering the sheets, though. You start at the last page (for each sub-assembly, like "wings") and work to the first page. I scratch built mine, so I can attest to the fact that you don't need a build manual.

[lakespookie]

One nice thing about the plans is you basically stay on one page and finish everything before moving to the next page. Sonex has a strange way of ordering the sheets, though. You start at the last page (for each sub-assembly, like "wings") and work to the first page. I scratch built mine, so I can attest to the fact that you don't need a build manual.

There are a handful of pages where they give you an order for things the wing page where you put on the wings is one of those, Also make sure you check the website for drawing updates, and that you also download the supplemental guide they can be very helpful.