COVID lockdown

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

COVID lockdown

Postby fastj22 » Thu Mar 26, 2020 6:22 pm

My state, Colorado, has issued a lockdown of all citizens to a very small list of activities (food, med, critical work). Recreational aviation, although essential to my mental health, was not one of them. My glider club has shutdown, even though I live at an airpark, I really don't feel like taking the Sonex out of the barn for a few laps around the dog patch. Just does seem right to be having fun while others are stuck. I really shouldn't go poke my head in my neighbors hangars to shoot the @#$%.

So what to do? I have two planes to care and feed. Maybe do another condition inspection on the Sonex. Polish the glider. Glider trailer needs some TLC. Clean and organize the hangar. Sort my big tray of misc nuts and bolts.

Looks like at least two more weeks at the earliest. What are all your plans?

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: COVID lockdown

Postby pfhoeycfi » Thu Mar 26, 2020 7:50 pm

Same at PGC. Pa is essentially shutdown. I was able to do the last bunch of tows before we stopped glider ops. Would like to get the wings on and drilled but that will have to wait. Still there's plenty to do.
Peter Hoey
SEL Pvt, Comm Glider, CFIG, Pawnee & L19 Towpilot
Philadelphia Glider Council
Sonex B SNB0021, N561PH, Taildragger, Aerovee Turbo, MGL MX1, First flight Dec 18, 2022
Also built Sonerai IIL N86PH
pfhoeycfi
 
Posts: 384
Joined: Wed Jun 28, 2017 3:45 pm

Re: COVID lockdown

Postby Bryan Cotton » Thu Mar 26, 2020 7:59 pm

Working at home from my hamster wheel desk.

Also working on the kid's new 1984 Honda Magna, the other kid's hovercraft, the '98 Saturn, and my KX155.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5494
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

COVID lockdown

Postby caveman371 » Thu Mar 26, 2020 9:48 pm

Not a total lockdown in Nevada yet so trying to get to my airport once a week to play or fly. I have been home for the last couple of weeks from my airline job. When I go back will try to keep my distance from folks . Lots of reorganization in my garage too


Sent from my iPad using Tapatalk
User avatar
caveman371
 
Posts: 33
Joined: Thu Mar 26, 2020 9:17 pm

Re: COVID lockdown

Postby Fastcapy » Thu Mar 26, 2020 10:25 pm

Luckily here in WI outdoor recreation is considered an essential activity and per statutes private aviation is considered a outdoor recreational activity!
Mike Beck
Oshkosh, WI (KOSH)
Sonex #1145 N920MB
Std Gear, Modified Aerovee, Rotec TBI, Dual Stick, Acro Ailerons
MGL Panel
Airworthiness: 10/24/13, First Flight: 05/18/14
Fastcapy
 
Posts: 335
Joined: Sun Jan 12, 2014 11:45 am
Location: KOSH

Re: COVID lockdown

Postby Rynoth » Thu Mar 26, 2020 10:47 pm

Can one still ride a snowmobile in Colorado? If so, I’d think you could fly an airplane (while maintaining social distance of course.)
Last edited by Rynoth on Fri Mar 27, 2020 10:11 am, edited 1 time in total.
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN

Re: COVID lockdown

Postby MichaelFarley56 » Fri Mar 27, 2020 12:21 am

Regardless of the published rules here in Ohio, I’m trying to take advantage of the down time by working on my Waiex’s Jabiru 3300 engine swap. I’ve been at my hangar nearly every day and I’m slowly getting there. New cowling is nearly finished and baffling is also nearly done. If I can get that completed in the next few days I’ll be ready to focus on electrical connections and whatever other small tasks are needed so I can get this baby running again! I’m anxious to get this little project completed!

Otherwise I’m busy hanging with the kids, and drinking plenty of BEvERages!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio

Re: COVID lockdown

Postby DCASonex » Fri Mar 27, 2020 9:25 am

Despite what has been called a stay home order, outdoor activities are still permitted in New York State so long as it is not in groups. Since I can enter the local airfield, pull out and fuel my Sonex without need to interface with anyone, about 5,000 ft. of vertical social distancing seems about right.

David A..
DCASonex
 
Posts: 935
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA

Re: COVID lockdown

Postby builderflyer » Fri Mar 27, 2020 10:16 am

I live on an airpark in California where few residents fly their planes, even under normal circumstances. But one fellow did fly recently and I'll be flying my Sonex as soon as it is back together. We have no reported cases of the virus in our entire county, for whatever that is worth.

Flying helps maintain my sanity. Someone may have to take my keys away or lock up the fuel pumps to keep me out of the sky.

Art,,,,,,,,,,,,,,,,Sonex taildragger #95,,,,,,,,,,,,,,,,,Jabiru 3300 #261
builderflyer
 
Posts: 441
Joined: Sat Jul 09, 2016 12:13 pm

Re: COVID lockdown

Postby WesRagle » Fri Mar 27, 2020 10:43 am

From the beginning I took a rather nonchalant attitude about the virus. I just thought of it as the mother of all flu seasons. I'm paying for that attitude now. So, if any of you guys with flying planes could fly over my house and drop some toilet paper I would appreciated it. I would ask for eggs too, but that probably wouldn't end well.

Wes
Wes Ragle
Onex #89
Conventional Gear
Long Tips
Hummel 2400 w/Zenith Carb
Prince P Tip 54x50
First Flight 06/23/2020
42.8 Hrs. as of 10/30/21
WesRagle
 
Posts: 899
Joined: Fri Jan 05, 2018 12:35 pm
Location: Weatherford, Tx

Next

Return to General Discussion

Who is online

Users browsing this forum: ampzapper and 36 guests