Clocking the turbo

[OneTallShort]

Hoping to save someone some time. After screwing around for an evening trying to clock the cold side of the turbo with my (too small) retaining ring pliers, I found a solution that works.

https://goo.gl/photos/1PDxhn6iiFZQoPtw5
https://goo.gl/photos/PMe42fm99KvwxpFC9


Basically just use bent angle needle nose pliers. These I picked up at NAPA.

Gregg Short
N715SX -working on firewall forward.

[MichaelFarley56]

Thanks for sharing Gregg! That looks like a simple and elegant solution!