Looking for a Canopy

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Looking for a Canopy

Postby epvans » Mon Aug 04, 2014 3:06 pm

I am at the point where I am fitting my canopy. I spent most of Sunday fitting and sanding it and when I started to drill the holes the canopy cracked in a high stress area. I have had the canopy bundled up in my attic for several years, its a 2005 vintage and I am assuming the temperature cycles did not help in the attic. Anyway with that out the way I thought I would post before ordering from Sonex.
So if you have a spare canopy and want to sell it to me please email me at "shaypete@gmail.com"

Thank you

Peter
SNX773
epvans
 
Posts: 22
Joined: Tue Jun 07, 2011 12:11 am

Re: Looking for a Canopy

Postby N111YX » Mon Aug 04, 2014 5:14 pm

Glad to hear you are making progress, Peter. I was hoping that your canopy would have "cured" over time and thus more flexible. Oh, well..sorry...
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Looking for a Canopy

Postby fastj22 » Mon Aug 04, 2014 6:43 pm

That's unfortunate. However, on the bright side, the new canopy material is much more rubbery and easier to work with. And you will find trimming your second one is a snap since you already learned how to do it.

If there are several builders in your area, consider just buying two and have Sonex ship them in the same box. Then let everyone know you have a spare.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: Looking for a Canopy

Postby andrewp » Tue Aug 05, 2014 9:16 am

So you are finishing a second sonex? Put us to shame.

I saw your lovely bird flying back into raleigh from the comfort of my deck a few weeks back. Very distinct engine note... easily to spot!
andrewp
 
Posts: 213
Joined: Mon Oct 14, 2013 11:10 pm

Re: Looking for a Canopy

Postby epvans » Tue Aug 05, 2014 10:14 am

Thank for all the replies and compliments. As I am not the original of the kit, Sonex's policy is to charge full price.
So $320 for the canopy and $190 for shipping.
Turns out to have been an expensive Sunday afternoon.

I guess I am going to have to bite the bullet and stop whining


Peter
epvans
 
Posts: 22
Joined: Tue Jun 07, 2011 12:11 am

Re: Looking for a Canopy

Postby DCASonex » Wed Aug 06, 2014 9:00 am

Check out Todd's canopies. I have not seen any reports of these cracking. My Sonex canopy cracked even though bonded and not bolted in place (no holes), my Todd's is still crack free. Difference is sides match the straight sides of fuselage and thus are not under stress when installed. Two options from Todd. Full canopy that includes windshield and the "canopy", or back half "canopy" only. I kept the Sonex Lexan windshield for its better impact resistance, and because it is cheap to replace with flat Lexan from any local source, and replaced only the "canopy" portion.

David A.
DCASonex
 
Posts: 935
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 66 guests